Black & Decker instruction manual 20V max* Trimmer/Edger, LST400, LST420, Catalog Numbers

20V max* Trimmer/Edger

INSTRUCTION MANUAL

Catalog Numbers

LST400, LST420

KEY INFORMATION YOU SHOULD KNOW:

•The guard must be installed before trimming or edging - if not, the motor will overheat.

•When replacing the line, use only .065 inch diameter ROUND line (B&D Model #AF-100 is recommended) - otherwise the trimmer will not function properly.

•Do not bump the feed head against the ground - it will disrupt the automatic feed mechanism. Thank you for choosing Black & Decker! To register your new product go to www.BlackandDecker.com/NewOwner

Please read before returning this product for any reason.

If you have a question or experience a problem with your Black & Decker purchase, go to http://www.blackanddecker.com/instantanswers

If you can’t find the answer or do not have access to the Internet,

call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent. Please have the catalog number available when you call.

Save this manual for future reference.

VEA EL ESPANOL EN LA CONTRAPORTADA.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under a workload, nominal voltage is 18.

1