Panasonic SX-KN2400, SX-KN2600 manual Error messages, Contents, Sequencer Data

Error messages

No.		Contents
00	The	data on	the	disk that	you	are
	using is for a different product.
	An error has occurred while the disk
01	was loading.
	Please try again!
02	There is no disk in the Disk Drive.
03	The file that you tried to load is empty.
	An error has occurred while the disk
05	was saving.
	Please try again!
	The disk that you are using is write
06	protected.
	Please remove the write protection
	and try again.
07	The	disk that	you	are using is		full.
	Please use another disk.
	An error has occurred while the disk
08	was formatting. The disk that you are
	using may be faulty.
	Please try formatting another disk.
10	The data is already copy protected.
15	The	song you	are	trying to	save is
	empty.
	This STANDARD MIDI FILE is incom-
16	patible with this instrument and cannot
	be loaded.
17	This is not a STANDARD MIDI FILE.
	The timebase (PPQ resolution) that
18	you	tried	to	load	is	not
	24/48/96/192/288/384 PPQ.
	A problem has occurred with your
20	SEQUENCER Data.
	This might be due to a damaged or
	faulty disk.
21	Memory full
22	It is necessary to press REC STOP to
	complete this procedure.
	It is impossible to change the time sig-
23	nature because it has already been
	set in the existing tracks.
	A rhythm track already exists. It is
24	impossible to assign two tracks to
	rhythm.
25	It is only possible to change the veloc-
	ity on a melody track.
	It is only possible to merge melody
26	tracks.
	Tracks such as rhythm, chord and
	control cannot be merged.

No.		Contents
	It is only possible to copy melody
27	tracks.
	Tracks such as rhythm, chord and
	control cannot be copied.
28	This song is too long to be saved as a
	MIDI file.
	The MIDI file that you have tried to
	load exceeds the memory capacity of
29	this instrument and cannot be played.
	The SEQUENCER memory has been
	cleared.
	It is not possible to change the time
	signature of a COMPOSER pattern
30	after it has been recorded.
	If you want to proceed, you must first
	clear the entire COMPOSER pattern.
	The time signature of the pattern from
	which you are copying is different from
	the COMPOSER memory that you are
31	using.
	Either: Change the time signature of
		the COMPOSER memory
	or:	Copy from a pattern that has
		the same time signature
32	Memory full
33	Select a Track before setting parame-
	ters for AUTO PUNCH RECORD.
	The file that you are trying to load was
43	saved on a previous KN keyboard. It is
	only possible to load using the “PER-
	FORMANCE” option.
	It is impossible to edit a Drum Kit.
44	Please select a different sound from
	any group except Keyboard Percus-
	sion.
	It is only possible to insert MELODY
46	Tracks. Tracks		such as	RHYTHM,
	CHORD and CONTROL cannot be
	inserted.
	This procedure is not possible with a
47	composer pattern or the metronome.
	Please select a preset rhythm pattern.
	It is not possible to record using preset
54	banks,	compile	banks,	or control
	banks. Please select one of the user
	banks.
	Special tracks such as CHORD
	(APC), RHY and CTL exist in the song
55	from which you are copying and are
	incompatible with the destination song
	because it is in the GM mode.
				191

QQTG0692