Panasonic SX-KN2600 manual Pitch Edit, Key Shift & Detune, Keyboard Octave, Pitch Envelope, Part

Models: SX-KN2400 SX-KN2600

1 200
Download 200 pages 51.82 Kb
Page 162
Image 162
Pitch Edit

Part X

Sound Edit

Sound Edit

Pitch Edit

Adjust the settings related to the pitch of the sound.

KEY SHIFT & DETUNE

1.On the SOUND EDIT menu display, select

PITCH.

The display looks similar to the following.

2.Use the buttons to the left of the display to

select a tone (1st, 2nd, 3rd or 4th).

Use the and buttons to select a setting item and then the and buttons to specify a selection.

3.Use the KEY SHIFT and buttons to spec-

ify the output pitch.

Units are in semitones.

4.Use the DETUNE and buttons to fine-

adjust the pitch.

Slight differences in the DETUNE values between the tones add fullness to the sound.

5.Use the TONE SCALE and buttons to

select the type of scale (NORMAL, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, FIX).

NORMAL is the normal scale type. For exam- ple, when 1/2 is selected, a difference in pitch between one key and the adjacent key becomes half the normal pitch difference. When FIX is selected, the pitch is the same regardless of which key is played.

KEYBOARD OCTAVE

1.Use the PAGE buttons to view the 2/4 display.

• The display looks similar to the following.

3.Use the RIGHT SPLIT and buttons to set the octave of the right part when the keyboard is split.

4.Use the LEFT SPLIT and buttons to set the octave of the left part when the keyboard is split.

PITCH ENVELOPE

Specify how the pitch changes over time, from the time the key is played to the time the sound dies out.

1.Use the PAGE buttons to view the 3/4 display.

• The display looks similar to the following.

2.Use the buttons to the left of the display to

select a tone.

Use the and buttons to select a setting item and then the and buttons to specify a selection.

3.Adjust the settings for the pitch change enve-

lope.

Use the buttons below the display to set the corresponding values. The envelope is cre- ated on the display as you input the settings.

Use the TOTAL DEPTH and buttons to specify the maximum level.

Use the START PITCH and buttons to set the start point. Use the STOP PITCH and buttons to set the stop point.

4.Repeat steps 2 and 3 for the other tones, as desired.

2.Use the OCT SHIFT and buttons to set the octave of the sound.

162

QQTG0692

Page 162
Image 162
Panasonic SX-KN2600, SX-KN2400 manual Pitch Edit, Key Shift & Detune, Keyboard Octave, Pitch Envelope, Part, Sound Edit