Part XIII

MIDI

MIDI

Common Setting

Set the functions which are common to all parts.

1.On the MIDI MENU display, select COMMON

SETTING.

• The display looks similar to the following.

2.Use and buttons to select the item.

NOTE ONLY:

Of the performance data, specify whether or not only note data is exchanged.

PROGRAM CHANGE TO P. MEM:

Enable or disable the exchange of program change numbers for the RIGHT 1 part by operation of the PANEL MEMORY buttons.

For this setting, the PANEL MEMORY 1 to 8 program change numbers correspond to the bank numbers as follows:

BANK A = 0 to 7 BANK B = 8 to 15 ...

INTRO, FILL-IN, ENDING:

Enable or disable the exchange of intro, fill-in and ending data.

APC CONTROL:

Enable the exchange of data for the on/off sta- tus of the AUTO PLAY CHORD’s BASIC, ADVANCED and PIANIST modes.

FADE IN/OUT:

Specify whether or not FADE IN/OUT data is exchanged.

PROGRAM CHANGE MODE NX SOUND:

Program change numbers are standardized among NX SOUND Technics models which are set to this mode. The program change number assigned to a given sound on one model is assigned to the same sound on all models which are set to the same mode.

PREVIOUS TECH:

Program change numbers are standardized among non-NX SOUND Technics models which are set to this mode. The program change number assigned to a given sound on one model is assigned to the same sound on all models which are set to the same mode.

MAP R:

GS basic sounds are transmitted and received as GS program change numbers.

MAP Y:

XG basic sounds are transmitted and received as XG program change numbers.

GS is a trademark of Roland Corporation. XG is a trademark of Yamaha Corporation.

DRUMS TYPE NX SOUND:

Keyboard percussion instrument sounds correspond to the same key note numbers for connected NX SOUND Technics models that are set to this type.

PREVIOUS TECH:

Keyboard percussion instrument sounds correspond to the same key note numbers for connected non-NX SOUND Technics models that are set to this type.

SONG SELECT ON:

Song number data can be exchanged. OFF:

Song number data cannot be exchanged.

PREVIOUS MODEL MODE ON:

INTRO, FILL IN, ENDING and APC CON- TROL, FADE IN/OUT data are converted to CONTROL CHANGE data for previous models and then transmitted.

OFF:

The above settings are not converted.

“Previous models” include all Technics instrument models except for:

KN7000/6500/6000

PR604/804/603/703/903/1000

3.Use and buttons to change the setting.

4.Repeat steps 2 and 3 for the other settings as desired.

182

QQTG0692

Page 182
Image 182
Panasonic SX-KN2600, SX-KN2400 manual Common Setting