Part IV | Sequencer |
Track Assign
Each SEQUENCER part is already assigned to a track number. However, you can use the TRACK ASSIGN function to assign parts to tracks as you wish.
1.On the SEQ MENU display, use the SONG SELECT ∧ and ∨ buttons to select the song number. Then select RECORD & EDIT.
2.On the RECORD & EDIT display, select
TRACK ASSIGN.
•The display looks similar to the following.
3.Use the TR ▲ and ▼ buttons to select the track.
4.Use the TRACK ASSIGN ∧ and ∨ buttons to
select the part for the specified track.
•When a part other than the CONTROL, APC, CHORD or RHYTHM part is assigned, the track assign procedure is completed at this point.
•Either the CHORD part or APC part can be assigned to a track, but not both.
•The CONTROL, APC, CHORD and RHYTHM parts cannot be assigned to more than one track.
•You can use the ON and OFF buttons for LOCAL CONT. to specify whether or not the sound of the part assigned to this track is gen- erated. Because no sound is generated for this instrument’s parts assigned to tracks set to OFF through this procedure, use this setting to generate sound from an external sound source through the MIDI connectors.
•You can use the MIDI OUT ON and OFF but- tons to specify whether or not the data of the part assigned to this track is sent as MIDI data. When set to OFF, the data is not sent, even if MIDI equipment is connected.
5.When assigning the CONTROL, APC, CHORD or RHYTHM part, press the OK but- ton.
TRACK ASSIGN PRESETS
A preset track assignment can be selected.
1.On the TRACK ASSIGN display, press the
PRESET button.
•The display looks similar to the following.
2.Use the SONG ∧ and ∨ buttons to select the
song number for which the preset track assignment will be effective.
•If ALL is selected, the track assignment is effective for all the songs.
3.Select the track assign mode.
INITIAL:
TECHNICS MULTI RECORDING:
The optimum track assignment for multiplex recording.
GM MULTI RECORDING:
The optimum track assignment for creating GENERAL MIDI data.
4.Press the OK button.
•“COMPLETED!” is shown on the display and the selected track assign mode is enabled.
•You can confirm the track assignment settings on the TRACK ASSIGN display.
Sequencer
91
QQTG0692
