Panasonic SX-KN2400 Part, Sequencer, Panel Write, The display looks similar to the following

Part IV Sequencer

Naming

Here is the way to assign a name to your recorded song.

1.On the SEQ MENU display use the SONG SELECT ∧ and ∨ buttons to select a song.

2.Press the NAMING button.

•The display looks similar to the following.

3.Use the buttons below the display to assign a

name.

•Set the character input position with the POSI- TION buttons, select the characters with the alphanumeric buttons and repeat name assignment.

•Switch from upper to lower case letters with the ABC, abc button.

•Press the INS button to enter a space at the cursor position.

•Press the DEL button to erase the character at the cursor position.

•Press the CLR button to erase the entire name.

•Press the →← button to center the name.4.Press the OK button.

Panel Write

You can change the panel status which is in effect at the beginning of the song. These are the settings which are recalled when the SEQUENCER RESET button is pressed.

1.On the SEQ MENU display, use the SONG ∧ and ∨ buttons to select the song number.

Then select PANEL WRITE.

•The display looks similar to the following.

3.Press the OK button.•“COMPLETED!” is shown on the display.

•PANEL WRITE is automatically activated at the when you start to record.

•For rhythm data, the data in the RHYTHM part has priority.

2.Use the panel buttons to change to the desired panel settings.

Sequencer

83

QQTG0692