Panasonic SX-KN2400 Page Filter Resonance, Attack Time, Decay Time, Release Time, Brightness

Part VIII Sound

<PAGE 4>

FILTER RESONANCE:

Use the RESO ∧ and ∨ buttons to adjust the amount of resonance (0 to 127).

ATTACK TIME:

Use the ATT ∧ and ∨ buttons to specify the attack time (0 to 127).

DECAY TIME:

Use the DEC ∧ and ∨ buttons to specify the decay time (0 to 127).

RELEASE TIME:

Use the REL ∧ and ∨ buttons to specify the release time (0 to 127).

BRIGHTNESS:

Use the BRI ∧ and ∨ buttons to adjust the bright- ness of the sound (0 to 127).

VIBRATO RATE:

Use the RATE ∧ and ∨ buttons to specify the vibrato speed (0 to 127).

VIBRATO DEPTH:

Use the DEP ∧ and ∨ buttons to specify the vibrato depth (0 to 127).

VIBRATO DELAY:

Use the DEL ∧ and ∨ buttons to specify the time interval from when the keys are played until the vibrato starts (0 to 127).

•The center value is 64 (±0).

Sound

<PAGE 5>

MONO/POLY MODE:

Use the MONO/POLY ∧ and ∨ buttons to select the output mode.

PORTAMENTO:

Use the PORTAMENTO ON/OFF buttons to enable or disable the portamento function. (Por- tamento is a continuous gliding movement from one tone to another.)

Use the ∧ and ∨ buttons to specify the porta- mento time.

•PORTAMENTO does not function for the

POLY MODE.

MODULATION SENSITIVITY:

Use the MOD SENS ∧ and ∨ buttons to adjust the sensitivity of the MODULATION.

•Use the MSB ∧ and ∨ buttons (half-tone incre- ments) and the LSB ∧ and ∨ buttons to adjust the setting.

BEND RANGE:

Use the BEND RANGE ∧ and ∨ buttons to spec- ify the PITCH BEND range (0 to 12). Increments are in semi-tones.

•The higher the number, the greater the change in pitch when the PITCH BEND wheel is operated.

149

QQTG0692