Panasonic SX-KN2400, SX-KN2600 manual Fade In/Fade Out, Fade OUT

Part II Playing the rhythm

Fade In/Fade Out

Add interest to your performance by starting a part with a fade-in or ending it with a fade-out.

• KN2600: does not work for the SD-AUDIO data playback.

FADE IN

At the beginning of the song, the volume of each part rises slowly.

1.Set up the panel settings for your perform- ance.

2.Turn on the FADE IN button.

FADE

IN OUT

•The indicator flashes. In this condition, the vol- umes for all parts change to 0 and no sound is produced from this instrument until the FADE IN is turned off or until step 3 is executed.

3.Play the keyboard or press the START/STOP

button.

•The volume slowly builds to its preset level.

•For the fade-in effect for a rhythm part or when playing back a SEQUENCER performance, turn on the FADE IN button before pressing the START/STOP button.

•At the end of the fade-in, the FADE IN indica- tor goes out.

•During the fade-in, FADE IN is shown in the upper right part of the normal display.

FADE OUT

At the end of the song, the volume of each part gradually fades to nothing.

1.Start the performance.

2.Turn on the FADE OUT button at the point you want the fade-out to start.

FADE

IN OUT

•The volumes of all the parts slowly fade to 0.

•The indicator flashes to show that fade-out is completed, and then goes out. The volumes for all parts return to their specified settings.

•If you wish to interrupt the fade-out, press the FADE OUT button to turn it off.

Playing the rhythm

57

QQTG0692