Panasonic SX-KN2400, SX-KN2600 manual Assigning parts to the keyboard, Conductor

Part I Sounds and effects

Assigning parts to the keyboard

The CONDUCTOR buttons are used to assign the parts (RIGHT 1, RIGHT 2, LEFT) to the keyboard in many different ways. For example, you can split the keyboard into right and left sections (SPLIT), and assign a different sound to each section.

CONDUCTOR

CONDUCTOR settings			How sounds are assigned to the keyboard
LEFT	RIGHT 2	RIGHT 1	All keys produce the RIGHT 1 sound.
CONDUCTOR			RIGHT 1
LEFT	RIGHT 2	RIGHT 1	All keys produce the RIGHT 2 sound.
CONDUCTOR			RIGHT 2
LEFT	RIGHT 2	RIGHT 1	All keys produce both the RIGHT 1 sound and the RIGHT 2 sound.
CONDUCTOR			RIGHT 1 + RIGHT 2
LEFT	RIGHT 2	RIGHT 1	The left keys produce the LEFT sound and the right keys produce the
			RIGHT 1 sound and the RIGHT 2 sound.
CONDUCTOR			LEFT	RIGHT 1 + RIGHT 2
LEFT	RIGHT 2	RIGHT 1	The left keys produce the LEFT sound and the right keys produce the
			RIGHT 1 sound.
CONDUCTOR			LEFT	RIGHT 1
LEFT	RIGHT 2	RIGHT 1	The left keys produce the LEFT sound and the right keys produce the
			RIGHT 2 sound.
CONDUCTOR			LEFT	RIGHT 2

•The volume for each part can be adjusted independently. (Refer to page 30.)

•The following conditions are in effect when the AUTO PLAY CHORD is used.

—BASIC, ADVANCED mode: You cannot assign sounds to all the keys.

—PIANIST mode: The keyboard cannot be split.

39

Sounds and effects

QQTG0692