Part XIII | MIDI |
Mode Setting
Initialize the settings for when the NX SOUND or GM LEVEL 2 mode is ON.
1. On the MIDI MENU display, select MODE | 2. Select the mode. |
SETTING. | • There are two modes for GM LEVEL 2 |
• The display looks similar to the following. | depending on the parts to use. |
| • The confirmation display appears. Press the |
| YES button to execute the function, or press |
| the NO button to cancel the function. |
MIDI
Input/output Setting
Make the settings which determine how various performance data is treated during data transmission and reception.
1. On the MIDI MENU display, select
INPUT/OUTPUT SETTING.
•The display looks similar to the following.
2.Use the ▲ and ▼ buttons to select the item.
RIGHT 1 INPUT CONDUCTOR:
When data for the RIGHT 1 part is received, the CONDUCTOR determines which part it is used for.
DIRECT:
When data for the RIGHT 1 part is received, it is treated as RIGHT 1 data, and perform- ance data for all parts is received on their respective basic channels.
AUTO PLAY CHORD INPUT
ON: Input data for the ACCOMP, BASS, APC and CHORD parts is received.
OFF: Data for the above parts is not received.
•MIDI channels should be assigned to the above parts before exchanging data.
VELOCITY INPUT DIRECT:
The VELOCITY value of received NOTE ON data is treated as is.
OFFSET:
The VELOCITY value of received NOTE ON data is offset (−50 to 50).
•Select VELOCITY OFFSET VALUE. Use the ∧ and ∨ buttons to change the value.
•All the values are offset from the current value by the fixed amount.
•The upper (127) and lower (1) limits can-
not be exceeded.
FIX:
The VELOCITY value of all received NOTE ON data is set to a fixed value. (1 to 127)
•Select VELOCITY FIXED VALUE. Use the ∧ and ∨ buttons to change the value.
ON: Keyboard notes generated by the
OFF: Only key note data of the pressed keys is transmitted.
TRANSPOSE OUTPUT
ON: The note data of the transposed notes is transmitted.
OFF: The note data of the played keys is transmitted.
183
QQTG0692
