Part IV | Sequencer |
MEASURE ERASE
Erase the recorded contents of specific mea- sures. You can also specify which type of data is to be erased.
•Note that only the contents of the measures are erased, not the measures themselves; the length of the performance remains the same.
1.Use the TRACK ∧ and ∨ buttons to specify
the track number.
•This function does not work for the RHYTHM part or CHORD part in which a repeat com- mand has been stored.
•If ALL is selected, data is erased from the specified measures of all the tracks at one time.
2.Use the FIRST MEAS ∧ and ∨ buttons to specify the start point (measure number).
3.Use the LAST MEAS ∧ and ∨ buttons to spec- ify the end point (measure number).
4.Use the ERASE DATA ∧ and ∨ buttons to specify the type of data to be erased.
ALL:
All data is erased. NOTE:
Only note data is erased.
CONTROL:
Only control data (volume, effect and other panel settings as well as selection changes) is erased.
5.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
MEASURE DELETE
Delete specified measures from a track.
•The length of the performance accordingly decreases by the number of deleted mea- sures.
1.Use the TRACK ∧ and ∨ buttons to select the
track from which measures are to be deleted.
•This function does not work for the CHORD or RHYTHM track in which the repeat function has been stored.
•If ALL is selected, the specified measures are deleted from all the tracks at one time.
2.Use the FIRST MEAS ∧ and ∨ buttons, to specify the first measure to delete.
3.Use the LAST MEAS ∧ and ∨ buttons to specify the last measure to delete.
4.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
Sequencer
99
