
Part II | Playing the rhythm |
Panel Memory
PANEL MEMORY stores all the current panel settings so you can recall them at the push of a button.
How to store the panel settings
By storing all the panel settings you use for a song in the same bank, for example, you can switch from one panel setup to the next in a flash.
1.Set up the desired panel settings (sounds, vol- umes, etc.)
2.Press the BANK VIEW button to turn it on.
■BANK VIEW
After selecting a bank, you can use the PAGE buttons to go to the PAGE 2/2 page and confirm the memory names of that bank’s 8 memories.
BANK VIEW
Playing the rhythm
• The BANK SELECT display appears.
3.Select the desired bank (A, B, C).
4.With the SET button held down, press one of the numbered buttons of the PANEL MEMORY (1 to 8).
|
| PANEL MEMORY |
|
|
1 | 2 | 3 | 4 | SET |
|
|
|
| BANK VIEW |
5 | 6 | 7 | 8 |
|
|
|
|
| NEXT BANK |
•You can use the BANK ∧ and ∨ buttons to view other banks.
•You can also access this display by pressing and holding any of the PANEL MEMORY number buttons (1 to 8) for a few seconds.
•The panel settings are now stored in the spec- ified bank and number.
64