Part VI | Disk Drive (KN2400) |
(KN2400)
<SEQUENCER SONG SAVE>
You can specify a single song in the SEQUENCER to save to the disk.
1.Use the PAGE buttons to access the 3/3
SEQUENCER SONG SAVE display.
•The display looks similar to the following.
2.Use the buttons below the display to select the song number you wish to save.
3.Press the SAVE button.
•The SAVE operation begins.
■SMF FORMAT 0
This instrument’s SEQUENCER data can be saved in the “Standard MIDI File” format (FOR- MAT 0) for use on other instruments.
•What you can save in the SMF format (FOR- MAT 0) is ordinary performance data, such as note data. Data such as chord and rhythm data, COMPOSER data, etc. is not saved. If you wish to also save this special Technics data, save the data in the Technics File for- mat.
•If you use the APC TO SMF CONVERT func- tion of the SEQUENCER, you can convert the patterns of the automatic accompaniment, etc. to SMF data. (Refer to page 100.)
1.To overwrite a file, use the ▲ and ▼ buttons
and then select a song name.
•If the number of files is 10 or more, you can use the PREV and NEXT buttons to go back or advance 10 files at a time.
2.If you wish to assign a name to the file, press the NAME button.
3.Use the buttons below the display to assign a name.
4.Press the OK button.
•The display returns to the SAVE display.
5.Use the FROM SONG buttons to select the
SEQUENCER song number you wish to save.
•The song name to save from is shown below the FROM SONG button.
6.Use the PANEL HEADER buttons to specify ON or OFF.
ON:
The sound and volume settings for each part are saved as data at the beginning of the file.
OFF:
This data is not saved.
Disk Drive
(Continued on the next page)
127
