QSC Audio AF2102-LA, WL2102-w, WL Small Grid, TD-000-227-00-C user manual Specifications

Specifications

	WL2102	WL2102-w
Configuration	Bi-amp or tri-amp mode
Transducers
Low-frequency	2 x 400 W, 16Ω 10" woofer, 3" voice coil, ceramic magnet assembly
High-frequency	1.4" exit, 3" titanium diaphragm, neodymium magnet assembly
Frequency Response (±3 dB)1	55 Hz – 18 kHz (with recommended DSP processing)
Frequency Range (-10 dB)	48 Hz – 20 kHz (with recommended DSP processing)
Nominal Impedance	HF: 16Ω
	LF bi-amp mode: 8Ω
	LF tri-amp mode: 16Ω (x 2)
Continuous Power Capacity /	HF: 80 W / 300 W (2 hours, AES1984-2 method, 1 – 10 kHz)
Recommended Power	LF bi-amp mode: 600 W / 1400 W (2 hours, AES1984-2 method, 80 – 800 Hz)
	LF tri-amp mode: 400 W / 700 W (x 2) (2 hours, AES1984-2 method, 80 – 800 Hz)

Sensitivity (1 W at 1 m)

HF: 107.5 dB (single cabinet measured in free space)

LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel)

Maximum Output	HF: 127 dB / 133 dB
Continuous / Peak (SPL at 1 m)	LF: 127 dB / 133 dB
Nominal Coverage	H: 140°
	V: dependent on number of elements used
Cabinet Type	Ported / trapezoidal
Enclosure Material	Cored composite			Baltic birch plywood
Finish	Black or white texture coat
Grille	Perforated, formed powder coated steel
Connectors	2 x Neutrik Speakon® NL8 in parallel
Pin Outs	Pins	Bi-Amp	Tri-Amp
	1+/1-	LF	MF
	2+/2-	NC	LF
	3+/3-	NC	NC
	4+/4-	HF	HF
Attachment Points	Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 0° – 10°
Weight (Net / Shipping)	70 lb (31.8 kg) / 78 lb (35.5 kg)			83 lb (37.7 kg) / 91 lb (41.4 kg)
Dimensions (HWD)	10.8" x 27.4" x 20.75" (274 mm x 696 mm x 527 mm)
Available Accessories
WL Small Grid	For suspended or stacking applications on QSC’s 215SB or 215 PCM subwoofer.
AF2102-LA	Frame used for suspending or stacking applications. Frame weight 37 lb/16.8 kg.
Software	EASE Focus line array modeling software tool available; visit www.qscaudio.com or contact QSC’s Technical Services for
	DSP files for both QSControl.net and Signal Manager
Ball-lock Pins
WL2102	Nylon Lanyard 5/16" D x 0.75" H, t-handle: p-n SR-000052-00 (Rear link and Front tube pin)
WL2102-w	7" Stainless steel lanyard 5/16" D x 0.75" W, t-handle: p-n HW-000106-00 (Rear link pin)
	5" Stainless steel lanyard 5/16" D x 0.75" W, t-handle: p-n HW-000126-00 (Front link pin)
AF2102-LA	4" Stainless steel lanyard 5/16" D x 1.25" W, Round head HW-000162-00 (Rear link pin)
WL Small Grid	9" Stainless steel lanyard 5/16" D x 1.25" W, Round head. HW-000163-00 (Rear link pin)

1)With recommended DSP settings

Specifications subject to change without notice.

10