QSC Audio TD-000-227-00-C, WL2102-w, AF2102-LA Dimensions, Stacking the WL Small Grid, Care

Stacking the WL Small Grid

The WL Small Grid comes with two aluminum I-bars used for aligning and securing the frame to QSC’s 215SB or 215PCM subwoofer.

To use the I-bars, simply slide each one into the small frame’s L-track and secure with a stud fitting. Then, turn the frame over (I-bars on the bottom) and slide the exposed I-bars into the subwoofer’s L-track. Secure the I-bar with a stud fitting. Note that the stud fittings used are not required to be load rated as they only retain the I-bars from moving laterally.

I-beam stacking bar: slide into L-track on WL Small Grid, then align and slide into L-track on subwoofer window.

When stacking a WL Small Grid on top of QSC’s 215SB or PCM cabinet, use the I-beam inserts (1 in each L-track) to assure proper alignment and to firmly secure the frame to the 215 cabinet. Secure using stud fittings.

Do not stack more than four (4) enclosures on a WL Small Grid.

Care

We suggest wiping down all screws, pins, hardware, and frames with LPS® Dry Film Lube or Starrett M1® All Purpose Lube before and after outside gigs to help prevent oxidation. This will not only prevent the formation of rust and other oxides, but also provide lubrication, adding to the longevity and ease-of-use of the WideLine-10 product.

Dimensions

7.7"

(196 mm)

Side

Front

20.75"

(527 mm)

10.75"

(273 mm)

20.4"

(518 mm)

27.5"

(699 mm)

25.0"

(635 mm)

10.1"

(257 mm)

Top

26.8"

(681 mm)

Rear

NOTE! Composite enclosures have approximately 1° of draft on the enclosure sides; the birch plywood enclosures do not. Handle orientation may vary between composite and plywood enclosures.

9