Part IV | Sequencer |
VELOCITY CHANGE
Modify the recorded velocity in specific mea- sures of specific tracks.
1.Use the TRACK ∧ and ∨ buttons to select the
track you wish to edit.
•You cannot select the track for the CONTROL, RHYTHM or CHORD part.
•If ALL is selected, all tracks will be edited.
2.Use the FIRST MEAS ∧ and ∨ buttons to specify the start point (measure number) of the velocity change.
3.Use the LAST MEAS ∧ and ∨ buttons to spec- ify the end point (measure number) of the velocity change.
4.Use the VELOCITY ∧ and ∨ buttons to specify
the change in velocity.
•The value you select will be added to or deleted from the current velocity.
5.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
TRANSPOSE
Change of key of specific measures of specific tracks.
1.Use the TRACK ∧ and ∨ buttons to select the
track you wish to edit.
•You cannot select the track for the CONTROL, RHYTHM or CHORD part.
•If ALL is selected, all tracks will be edited.
2.Use the FIRST MEAS ∧ and ∨ buttons to specify the start point (measure number) of the transpose.
3.Use the LAST MEAS ∧ and ∨ buttons to spec- ify the end point (measure number) of the transpose.
4.Use the TRANSPOSE ∧ and ∨ buttons to
specify the change in pitch.
•Increments are in semitones. A value of 12 is one octave. A – value lowers the pitch, and a + value raises it.
5.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
Sequencer
102
