Part III | Peformance Pads |
Record a phrase
“User Bank” A, B and C are reserved for storing your original phrases.
• You can also copy phrases which are recorded in the SEQUENCER.
1.Press the PROGRAM MENUS button to turn it
on.
•The display looks similar to the following.
2.Select PERFORMANCE PADS.
•The display looks similar to the following.
3.Use the buttons to the left of the display to
select a RECORDING BANK.
•The display changes to the RECORD PAD display.
•You can press the BANK NAMING button and assign a name to the bank.
•If the BANK CLR button is pressed, all the data in the bank is cleared (a confirmation dis- play appears).
4.Use the buttons below the display to select the
pad number to record.
•The display changes to the PAD RECORD- ING display.
•You can press the PAD NAMING button and assign a name to the bank.
•To clear all the current data in the selected pad, press the CLEAR THE PAD button, and then press the YES button on the confirmation display.
6.Press the OK button.
•For details about KEY SETTING, refer to page 111.
•For details about CHORD MODIFY CHANGE, refer to page 109.
7.Select the part to record to.
•Press the button for PART 1 or PART 2.
•Two parts can be recorded (PAD
•The display looks similar to the following.
8.Proceed to record.
•The recording procedure is the same as for the COMPOSER. (Refer to page 104.)
•In the PLAY SETTING, if LOOP is set to OFF, LOOP recording is not possible.
Performance Pads
5.Use the MEAS ∧ and ∨ buttons specify the
number of measures in the phrase. Use the TIME SIGNATURE ∧ and ∨ buttons to specify the time signature of the phrase.
71
QQTG0692
