Part IV | Sequencer | |
ADVANCE/DELAY | 3. Use the LAST MEAS ∧ and ∨ buttons to spec- | |
Speed up or delay the sound production of spec- | ify the end point (measure number) of the | |
change. | ||
ified performance data. | ||
|
1.Use the TRACK ∧ and ∨ buttons to select the
track you wish to edit.
•You cannot select the track for the CONTROL, RHYTHM or CHORD part.
•If ALL is selected, all tracks will be edited.
4.Use the ADVANCE/DELAY ∧ and ∨ buttons
to accelerate or delay the timing of the sound production
•A + value causes the notes to sound later, and a – value causes the notes to sound earlier.
5.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
2.Use the FIRST MEAS ∧ and ∨ buttons to specify the start point (measure number) of the change.
SD Audio Synchro (KN2600)
The sound data on the SD card in the SD slot can be synchronized with SEQUENCER playback.
1.On the SEQ MENU display, press the SD AUDIO SYNCHRO button.
2.Use the PLAYLIST NUMBER ∧ and ∨ buttons to select the number you wish to synchronize from the PLAYLIST.
3.Play back the SEQUENCER song. (Refer to page 81.)
<Note>
When creating SEQUENCER data that is syn- chronized with SD AUDIO data, the environment in which the SD AUDIO data was created may result in data that is slightly out of sync with the SEQUENCER. When this occurs use the TEMPO ADJUST feature to compensate for this timing discrepancy
103
Sequencer
