Part I | Sounds and effects |
REVERB
REVERB applies a reverberation effect to the sound.
Press the REVERB button to turn it on.
REVERB
■Type and parameter settings
1.Press and hold the REVERB button for a few
seconds.
•The display changes to the following.
2.Use the ▲ and ▼ buttons to select an effect
group.
•The EFFECT MEMORY is an edited effect group.
3.Use the buttons to the right of the display to
select a type.
•If the types comprise more than one display “page,” use the PAGE buttons to switch pages.
4.Use the TOTAL DEPTH ∧ and ∨ buttons to set the depth of the effect.
•This display can also be accessed from the REVERB & EFFECT MENU display. (Refer to page 155.)
CHORUS
Add breadth to the sound.
Press the CHORUS button to turn it on.
CHORUS
■Type and parameter settings
1.Press and hold the CHORUS button for a few
seconds.
•The display looks similar to the following.
2.Use the ▲ and ▼ buttons to select the name
of the effect group.
•EFFECT MEMORY is an edited effect group.
3.Use the buttons to the right of the display to select a type.
■EFFECT EDIT
Your edited effect can be stored in a memory for later recall.
•The procedure is the same as for MULTI EFFECT. (Refer to page 42.)
Sounds and effects
■EFFECT EDIT
Your edited effect can be stored in a memory for later recall.
•The procedure is the same as for MULTI EFFECT. (Refer to page 42.)
43
