Q-Logic 2300 series manual Specifications, Tables 2-2and 2-3define the QCP2330/2332 specifications

2 – QCP2330/2332 Specifications

Q

Table 2-1lists the values to enter and their corresponding data rates.

Table 2-1. Fibre Channel Data Rates

Value	Data Rate
0	One gigabit
1	Two gigabits
2	Auto-negotiated rate

2.5

Specifications

Tables 2-2and 2-3define the QCP2330/2332 specifications.

Table 2-2. QCP2330/2332 Board Operating Environment

Environment	Minimum	Maximum
Operating temperature	0°C/32°F	55°C/131°F
Storage temperature	–20°C/–4°F	70°C/158°F
Relative humidity (noncondensing)	10%	90%
Storage humidity (noncondensing)	5%	95%

Table 2-3. QCP2330/2332 Board Specifications

Type		Specification
Host bus	Conforms to PCI Local Bus Specification, revision 2.1
Fibre Channel	Bus type: fibre optic media
specifications	Bus transfer rate:	200 MBps maximum at half duplex
		400 MBps maximum at full duplex
	Interface chip:	ISP2310 (one in QCP2330; two in QCP2332)
Central	Single-chip design that includes a RISC processor, Fibre Channel
processing unit	protocol manager, DMA controller, and 1-Gb transceivers.
(CPU)
RAM	256K bytes of synchronous SRAM (SSRAM) for each ISP2310
NVRAM	256 bytes for each ISP2310, field programmable
Flash	128K bytes of flash ROM in each ISP2310, field programmable
On-board DMA	Three independent DMA channels: two data and one command.
	Integrated frame buffer FIFOs (6K-byte receive and 4K-byte transmit)
	for each data channel.
Connectors	LC-style connector that supports non-OFC, multimode fibre optic
	cabling using 2⋅5 fibre optic transceiver module.
Form factor	16.0cm ⋅ 10.0cm (6.3" ⋅ 3.9")
Operating power	Less than 15 watts

2-12 CF2351102-00 F