A.O. Smith ST 3000 Technical specifications, FOR THE INSTALLER 2.1Installation, Water connections

1.4 Technical specifications

			ST 1500/2000	ST 2500/3000
1	Storage capacity	ltr	1500/2000	2500/3000
2	Tank heat loss	kWh/24h	8.5	10.1
3	Maximum working pressure	bar	7	7
4	Test pressure tank	bar	12	12
5	Maximum allowed tank temperature	°C	95	95
6	Weight empty	kg	374/506	637/739

2. FOR THE INSTALLER

2.1Installation

A qualified, competent installer must install the hot water storage tanks in accordance with local valid regulations and codes.

Location needs to be chosen to prevent damage in case of tank leakage (e.g. place tank in a drain pan or near a floor drain of sufficient capacity). For mounting of the jacket see separate attached Kit installation sheet.

2.2 Water connections

The water heater is suitable for connection to vented, un-vented and pumped pressurized systems. In each case appropriate valves and fittings should be used to ensure the system complies with the governing codes and appropriate building requirements. The maximum working pressure is 7 bars. A typical installation diagram for an un-vented installation is as follows:

4