Section 2
QCP2330/2332
2.1
QCP2330/2332 HBA Components
Figure 2-1 identifies the QCP2330/2332 HBA components referenced throughout this section.
Each QCP2330/2332 HBA has a unique serial number, located on the back of the HBA. Take a minute to write down the serial number of the QCP2330/2332 HBA in the unlikely event that the NVRAM is corrupted.
J1
1 
3 
J5
J6
J2
1 
3 
J5 and J1 
QCP2332
ONLY
ISP CHIP |
ISP CHIP |
QCP2332
ONLY
LED1
RELEASE SWITCH
NOTE: THE SERIAL NUMBER IS ON THE OTHER SIDE
OF THE HBA.
Figure 2-1. QCP2330/2332 HBA Layout
2.1.1
LEDs
In a standard installation, LED1 is off, indicating that the HBA is active.
In a hot swap installation, LED1 turns blue while the HBA is inserted. If the LED turns off, the HBA is inserted and has been configured.
