Panasonic SX-KN2400, SX-KN2600 manual Key Setting, Part, Composer

Models: SX-KN2400 SX-KN2600

1 200
Download 200 pages 51.82 Kb
Page 107
Image 107
KEY SETTING

Part V

Composer

To assign a name to each VARIATION, press the VARI button and select a number.

3.On the RECORD MEMORY display, press the

OK button.

• The display looks similar to the following.

4.Press the CLEAR THE ENTIRE PATTERN

button.

• The display looks similar to the following.

5.Press the YES button.

All the data for the selected pattern is erased.

6.Press the MEASURE SETTING button.

7.Use the MEASURE and buttons to spec- ify the number of measures in your new rhythm pattern (1 to 16).

8.Use the TIME SIGNATURE and buttons

to specify the meter of the pattern (1/4 to 8/4).

When the settings for the MEASURE and TIME SIGNATURE of the INTRO or ENDING patterns are changed, the Maj and Min set- tings change at the same time.

9.Press the OK button.

10.Press the EXIT button.

KEY SETTING

Set the key and chord in which you wish the recorded pattern to be played. If the recorded performance is played in a key or chord different from this setting, the automatic accompaniment will not be able to distinguish the correct chord.

1.On the RECORDING display press the KEY

SETTING button.

• The display looks similar to the following.

2.Use the KEY and buttons to set the key. Use the CHORD and buttons to set the chord type (Maj/Min).

3.When you have finished making the settings, press the EXIT button.

Composer

107

QQTG0692

Page 107
Image 107
Panasonic SX-KN2400, SX-KN2600 manual Key Setting, Part, Composer