Panasonic SX-KN2400, SX-KN2600 manual Measure Copy, Measure Erase, Part, Composer

Models: SX-KN2400 SX-KN2600

1 200
Download 200 pages 51.82 Kb
Page 113
Image 113
Manual background

Part V

Composer

MEASURE COPY

Copy recorded data of specified measures to a specified point.

On the destination track, the new data replaces the current measure contents.

1.Specify the measures you wish to copy from

the source track (FROM).

On the FROM side, specify the settings with the corresponding buttons.

PART:

Select the part to copy from. (If ALL is selected, all parts are copied.)

FIRST MEASURE:

Specify the first measure to copy.

LAST MEASURE:

Specify the last measure to copy.

2.Specify where you wish to copy the selected

measures to.

On the TO side, specify the settings with the corresponding buttons.

PART:

Select the part to copy to.

START MEASURE:

Specify the start point to copy the selected measures to.

3.Press the OK button.

The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.

If the FROM and TO parts are the same and the FROM and TO measures overlap, copy is not possible.

MEASURE ERASE

Erase the recorded contents of specific mea- sures.

Note that only the contents of the measures are erased, not the measures themselves; the length of the performance remains the same.

1.Use the PART and buttons to specify the

part.

If ALL is selected, data is erased from the specified measures of all the parts at one time.

2.Use the FIRST MEASURE and buttons to specify the start point (measure number).

3.Use the LAST MEASURE and buttons to specify the end point (measure number).

4.Press the OK button.

The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.

113

Composer

QQTG0692

Page 113
Image 113
Panasonic SX-KN2400, SX-KN2600 manual Measure Copy, Measure Erase, Part, Composer