Part IV

Sequencer

Song Select

You can select a desired song from the list of recorded songs.

1.On the SEQ MENU display, select RECORD & EDIT.

2.On the RECORD & EDIT display, select

SONG SELECT.

The display looks similar to the following.

3.Use the SONG SELECT and buttons to

select a song.

The total amount of memory used for the cur- rent song is shown as a percentage (%) to the right of the song name.

If the NAMING button is pressed, the NAMING display appears.

To optimize memory, songs you do not wish to preserve should be deleted. (Refer to page 93.)

Punch Record

If you make a playing error during REALTIME RECORD or would like to change the recording for some other reason, you can use the punch recording feature to correct a selected portion of the performance without having to redo the whole part.

Recording the performance

Playback

Playing error

Punch in

Punch out

Replay this portion

Recording mode

Sequencer

1.On the SEQ MENU display, use the SONG SELECT and buttons to select the song number. Then select RECORD & EDIT.

2.On the RECORD & EDIT display, select

PUNCH RECORD.

The display looks similar to the following.

3.Select the track which contains the portion you

want to correct.

You cannot select a track in which no data is stored.

On the display “REC” indicates tracks which are being recorded, and “PLAY” indicates tracks which are being played back.

4.Use the MEAS and buttons to specify the

beginning measure of playback.

“MEASURE=” indicates the current measure number.

5.Press the START/STOP button to begin play- back of the specified track.

84

QQTG0692

Page 84
Image 84
Panasonic SX-KN2600, SX-KN2400 manual Song Select, Punch Record