American Power Conversion SUDP4000I, SUDP8000I Specifications, Limited Warranty, SUDP10000I

Specifications

	SUDP4000I	SUDP6000I		SUDP8000I		SUDP10000I
Acceptable input voltage				220/230/240V
		+10%/-15% normal operation
		±10% bypass operation
Input voltage (on-line operation)		220/230/240			VAC
230 volt output range		220/230/240 VAC
Nominal input frequency			50 or 60 Hz
Input protection		Resettable circuit breaker
Frequency limits (on-line operation)		50 or 60 Hz,			8%
Bypass Transfer time		2 ms typical, 5 ms maximum
Maximum load, Total	4000 VA	6000 VA		8000 VA		10000 VA
On-battery output voltage				230 VAC
On-battery frequency		50 or 60 Hz,			0.1 Hz;
		unless synchronized to utility during brownout.
On-battery waveshape		Low-distortion sine wave
Overload protection (on-battery)	Overcurrent and short-circuit protected, latching shutdown on overload
Overload protection (on-line)	25A	40A			50A	63A
Noise filter		Normal and common		mode EMI/RFI suppression,
		100 kHz to 10 MHz
Battery type		Spill proof, maintenance free, sealed lead-acid
Typical battery life		5 years, depending on number of discharge cycles
		and ambient temperature
Typical recharge time		24 hours from total discharge
Operating temperature		0 to 40￿C (+32 to +104￿F)
Storage temperature		-15 to +45￿C (+5 to +113￿F)
Operating and storage relative humidity		30% to 95%, not condensing
Operating elevation		0 to +3,000 m (0 to +10,000 ft.)
Storage elevation		0 to +15,000 m (0 to +50,000 ft.)
Electromagnetic Compatibility (EMC)			EN50091-2
Electromagnetic Interference (EMI)		EN55022 Class A
Electromagnetic Immunity		IEC 801-2, 801-3, 801-4, 801-5, 1000-2-2
		EN60555-1, -2, -3, EN61000-4-1, EN61000-4-11
Audible noise in dBA at 1 m (3 ft.)			45 dBA
Safety approvals		GS licensed by VDE to EN50091-1-1 and EN60950
Size (W x H x D)		315 x 650 x 610 mm
Weight	128 kg				138 kg

Limited Warranty

American Power Conversion (APC) warrants its products to be free from defects in materials and workmanship for a period of two years from the date of purchase. Its obligation under this warranty is limited to repairing or replacing, at its own sole option, any such defective products. To obtain service under warranty you must obtain a Returned Material Authorization (RMA) number from customer support (see the Service section of the User’s Manual). Products must be returned with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence, or misapplication or has been altered or modified in any way. This warranty applies only to the original purchaser who must have properly registered the product within 10 days of purchase.

EXCEPT AS PROVIDED HEREIN, AMERICAN POWER CONVERSION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL APC BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, APC is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

990-1007A, Revision 2 9/99 16