Part I | Sounds and effects |
Sounds and effects
MIC
You can add reverb and other effects to sound from a connected microphone.
•Connect a microphone to this instrument. (Refer to page 188.)
1.Set the PROGRAM MENUS button to ON.
PROGRAM
MENUS
•The display will appear as follows:
2.Select REVERB & EFFECT.
3.Select MIC REVERB & EFFECT.
•The display looks similar to the following.
4.Set using the button on the left of the display. Select the effect name (MIC REVERB/MIC EFFECT).
5.Set the MIC REVERB.
•Use the PARAMETER ▲ and ▼ buttons to select an attribute, and use the VALUE ∧ and ∨ buttons to adjust the corresponding setting.
•You can specify whether or not to apply the reverb with the MIC REV ON/OFF button.
6.Set MIC EFFECT.
•Use the PARAMETER ▲ and ▼ buttons to select an attribute, and use the VALUE ∧ and ∨ buttons to adjust the corresponding setting.
•Enable or disable the effect using the MIC EFF ON/OFF button.
44
QQTG0692
