Part II | Playing the rhythm |
Playing the rhythm
FADE SET
Adjust the settings for the FADE IN and FADE OUT.
1.Press and hold the FADE IN or FADE OUT button for a few seconds.
FADE
IN OUT
• The display looks similar to the following.
2.Use the ▲ and ▼ buttons to select the item. Use the ∧ and ∨ buttons to change the set- ting.
FADE IN
Time:
Specify the time elapsed between 0 volume to the set volume (1 measure to 16 mea- sure).
FADE OUT
Time:
Specify the time elapsed between the set volume and 0 volume (1 measure to 16 measure).
Auto Reset:
Specify whether the volume of each part automatically returns to its specified setting (ON, OFF).
Rhythm Auto stop:
Specify whether the rhythm turns off after
SEQ Auto stop:
Specify whether the SEQUENCER play- back automatically stops after
•The display returns to the previous display a few seconds after you have changed the set- tings.
•You can also access this display from the CONTROL MENU display. (Refer to page 171.)
58
