Part VI
•Note that this procedure clears any data which is currently stored on the disk.
1.Select the type of format (2DD or 2HD).
•Be sure to select the type which is the same as your disk type.
•If the type is automatically detected, the dis- play changes directly to the following display, without showing the type select display.
•The display looks similar to the following.
•If you wish to select the type again, use the PAGE button to access the PAGE 2/2 display.
2.Press the YES button to format the disk, or
press the NO button to cancel the format.
•When the YES button is pressed, disk format begins. After about
3.Use the buttons below the display to assign a
name.
•Set the character input position with the POSI- TION buttons, select the characters with the alphanumeric buttons and repeat name assignment.
•Switch from upper to lower case letters with the ABC, abc button.
•Press the INS button to enter a space at the cursor position.
•Press the DEL button to erase the character at the cursor position.
•Press the CLR button to erase the entire name.
•Press the →← button to center the name.
4.Press the OK button.
Disk Drive (KN2400)
129
Disk Drive (KN2400)
