28
EN
RECORDING
Advanced
Features
(cont.)
Menu Screen Available Using The MENU Button (cont.)
DATE/TIME | Allows you to set the current date and time (☞ pg. 9). | |
|
|
|
TAPE LENGTH | Allows you to set the tape length depending on the tape used (☞ pg. 10). | |
|
|
|
REC TIME | This feature allows you to set the parameters for Animation and | |
| recording (☞ pg. 35). | |
INT. TIME | This feature allows you to set the parameters for | |
| Lapse recording (☞ pg. 35). | |
TALLY LAMP | OFF | The tally lamp remains off at all times. |
|
|
|
| ON | The tally lamp comes on to signal the start of recording. |
JLIP ID NO. | This number is necessary when connecting the camcorder to a device such as a computer | |
| using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06. | |
|
|
|
DEMO MODE | OFF | Automatic demonstration will not take place. |
| ON | Demonstrates certain functions such as Fade/Wipe, etc. When |
|
| “DEMO MODE” is set to “ON” and the Menu Screen is closed, |
|
| the demonstration starts. |
NOTES:
●When a tape whose Erase Protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available.
●By turning off the camcorder or inserting a tape whose Erase Protection tab is in the position that allows recording into it, “DEMO MODE” is set to “OFF” automatically.
●During the demonstration, all functions except zoom are disabled.
:
