JVC GR-FXM15 50ENUSERMAINTENANCE, After Use, Cleaning The Camcorder, Clean Lcd Monitor

Set the Power Switch to “POWER OFF” to turn off the camcorder.

50ENUSERMAINTENANCE

LENS COVER Open/Close Ring

BATTERY RELEASE

Set to “POWER OFF”.

Remove.

PUSH EJECT

NOTES:

After Use

1

2 Open the LCD monitor to an angle of over 60 degrees. Slide EJECT to open the cassette holder, then remove the cassette.

3 Close and lock the cassette holder by pressing PUSH.

4 Close and lock the LCD monitor.

5 Slide BATTERY RELEASE to remove the battery pack.

6 Turn the LENS COVER Open/Close Ring to close the lens cover.

Cleaning The Camcorder

1 CLEAN EXTERIOR Wipe gently with a soft cloth.

•Put cloth in diluted mild soap and wring it well to wipe off heavy dirt, then wipe again with a dry cloth.

2 CLEAN LCD MONITOR

Open the LCD monitor and wipe it gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

3 CLEAN LENS

Blow it with a blower brush, then wipe it gently with lens cleaning paper.

4 REMOVE EYEPIECE

Turn the eyepiece counterclockwise and pull it out.

5 CLEAN VIEWFINDER Remove dust using a blower brush.

6 RE-ATTACH EYEPIECE

Re-attach the eyepiece and turn it clockwise.

●Avoid using strong cleaning agents such as benzine or alcohol.

●Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

●Mould may form if the lens is left dirty.

●When using a cleaner or chemically treated cloth, refer to the cautions that came with it.

●When removing the eyepiece, be sure to hold the viewfinder securely.