JVC GR-FXM15 RECORDINGAdvancedFeaturesEN21, Fade/Wipe, Start Or End Recording, Fader, SLIDE Wipe

RECORDINGAdvancedFeaturesEN21

[Ex.: Fader]

Fade in

Fade/Wipe

These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end.

Display

MOSAIC

1 SELECT OPERATION MODE Set the Power Switch to “PRO.”.

Fade out 2 ENGAGEMODE FADE- OR WIPE-STANDBY

Press EFFECT to cycle through the modes as shown at

After 2 sec.left. Once the desired mode appears, it is selected and reserved.

•The selected mode’s name and its indication are displayed for approx. 2 seconds. Then the name disappears, and only the indication remains.

3 START OR END RECORDING

Press the Recording Start/Stop Button to activate fade- in/out or wipe-in/out.

		FADER
		MOSAIC
		SHUTTER
		SLIDE
OFF	OFF
(No indication)

4 TOMODECANCEL FADE- OR WIPE-STANDBY

Press EFFECT repeatedly until “OFF” appears.

•“OFF” is displayed for approx. 2 seconds and the fade/wipe standby mode is canceled.

FADER

Fades in/out to a black screen.

MOSAIC (Fader)

Gradually turns/returns the picture into/from a mosaic pattern.

SHUTTER (Wipe)

A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the centre.

SLIDE (Wipe)

A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.

EFFECT Button	Power
	Switch

NOTES:

●Pressing and holding the Recording Start/Stop Button allows you to vary the length for the image during fade in/out or wipe in/out.

●The screen becomes slightly reddish when the Fade/ Wipe is used with Sepia (☞ pg. 23).

●With the Electronic fog filter mode (☞ pg. 23) engaged, the image fades in/out to a white screen.

Recording Start/Stop Button