Manuals / Husqvarna / Lawn and Garden / Trimmer

Husqvarna 335FR Adjusting the harness and clearing saw, Standard harness, Triobalance harness

Models: 335FR

1 44

Download 44 pages 26.73 Kb

Page 16

ASSEMBLY

Adjusting the harness and clearing saw

WARNING! When using a clearing saw it

! must always be hooked securely to the harness. Otherwise you will be unable to control the clearing saw safely and this can result in injury to yourself or others. Never use a harness with a defective quick release.

Standard harness

Quick release

At the front is an easily accessible, quick release. Use this if the engine catches ﬁre or in any other emergency situation that requires you to free yourself from the machine and harness.

Spreading the load on your shoulders

A well-adjusted harness and machine makes work much easier. Adjust the harness for the best working position. Tension the side straps so that the weight is evenly distributed across both shoulders.

Correct height

1Forestry clearing

The machine should be supported in a harness when forestry clearing so that the cutting equipment is angled slightly forwards in relation to the ground. Adjust the

height using the strap on the harness for the support hook.

2Grass clearing

The machine should be supported in a harness when grass clearing so that the cutting equipment is parallel to the ground.

Triobalance harness

Quick release

Push down the red release lever to release the machine from the harness.

Adjusting the harness

1 Tighten the hip strap so that it sits securely.

16 – English

Image 16

Husqvarna 335FR manual Adjusting the harness and clearing saw, Standard harness, Triobalance harness

Contents

333R 335FR 335RX-series KEY to Symbols SymbolsOperator of the machine must Ensure, while working, that no Persons or animals come closer than Contents Introduction Dear customer What is WHAT? What is what on the clearing saw? General Safety Precautions Personal protective equipment Machine′s safety equipment Throttle lockout Stop switch Cutting attachment guardVibration damping system 335RX, 335FR Mufﬂer Cutting equipment Locking nutCutting equipment General rules Sharpening grass cutters and grass blades Sharpening the saw blade Trimmer head Assembly RX,FR RAssembling the handlebar and throttle Assembling the cutting equipment Fitting a blade guard, grass blade and grass cutter Fitting the blade guard and saw blade Shielded by the blade guard when doing this. Always Fitting other guards and cutting attachments Standard harness Adjusting the harness and clearing sawTriobalance harness Correct balance Fuel Handling Fuel safetyFuel Fueling Mixing Starting and Stopping Check before startingStarting and stopping Starting Stopping For throttle handles with a start throttle lockStarter cord around your hand Basic safety rules Working TechniquesGeneral working instructions ABC of clearing Forestry clearing using a saw blade Brush cutting with a saw blade Grass clearing using a grass blade Grass trimming with a trimmer head Maintenance Carburetor Fine adjustment of the idle speed T Correctly adjusted carburetorLow speed jet L High speed jet H Adjusting the start throttle speed Mufﬂer Cleaning the air ﬁlter Cooling systemBevel gear Air ﬁlter Spark plug Maintenance schedule Maintenance Daily Weekly Monthly Technical Data Technical data Approved accessories Type Cutting attachment guard, Art. no Your Warranty Rights and Obligations Emission Warranty Parts List Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T45, T45x Auto Trimmy SII Page 1151115-95