ASSEMBLY
Adjusting the harness and clearing saw
WARNING! When using a clearing saw it
! must always be hooked securely to the harness. Otherwise you will be unable to control the clearing saw safely and this can result in injury to yourself or others. Never use a harness with a defective quick release.
Standard harness
Safety release
At the front is an easily accessible, quick release. Use this if the engine catches fire or in any other emergency situation that requires you to free yourself from the machine and harness.
Spreading the load on your shoulders
A
Correct height
1Forestry clearing
The machine should be supported in a harness when forestry clearing so that the cutting equipment is angled slightly forwards in relation to the ground.
Adjust the height using the strap on the harness for the support hook.
2Grass clearing
The machine should be supported in a harness when grass clearing so that the cutting equipment is parallel to the ground.
Triobalance harness
Safety release
Push down the red release lever to release the machine from the harness.
Adjusting the harness
1 Tighten the hip strap so that it sits securely.
English – 19
