Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna 335XPT manual Clearing the trunk and preparing your retreat, Felling

Models: 335XPT

1 36
Download 36 pages 29.63 Kb
Page 22
Image 22

SAFETY INSTRUCTIONS

C Clearing the trunk and preparing your retreat

Remove any branches that are in the way. To do this it is best to work from the top down and keep the trunk between you and the chain saw. Never limb above shoulder height.

Remove any undergrowth from the base of the tree and check the area for obstacles (stones, branches, holes, etc.) so that you have a clear path of retreat when the tree starts to fall. Your path of retreat should be roughly 135 degrees behind the intended felling direction.

D Felling

Felling is done using three cuts. First you make the DIRECTIONAL CUTS, which consist of the TOP CUT and the BOTTOM CUT; followed by the FELLING CUT. By placing these cuts correctly you can control the felling direction very accurately.

DIRECTIONAL CUT

To make the DIRECTIONAL CUT you begin with the TOP CUT. Stand to the right of the tree and cut downwards at an angle.

Next make the BOTTOM CUT so that it finishes at the end of the TOP CUT.

The directional cut should run 1/4 of the diameter through the trunk and the angle between the TOP CUT and BOTTOM CUT should be 45°.

The line where the two cuts meet is called the

DIRECTIONAL CUT LINE. This line should be perfectly horizontal and at right angles (90°) to the chosen felling direction.

FELLING CUT

The felling cut is made from the opposite side of the tree and it must be perfectly horizontal. Stand on the left side of the tree and cut with the bottom edge of the bar.

Make the FELLING CUT about 3-5 cm (1.5-2 inches) above the flat section of the

DIRECTIONAL CUT.

Use full throttle and bring the bar and chain slowly into the tree. Make sure the tree does not start to move in the opposite direction to your intended felling direction. Drive a WEDGE or BREA- KING BAR into the cut as soon as it is deep enough.

Finish the FELLING CUT parallel with the DIRECTIONAL CUT LINE so that the distance between them is at least at least 1/10 of the trunk diameter. The uncut section of the trunk is called the BREAKING STRIP.

The BREAKING STRIP act as hinges that control the felling direction of the falling tree.

All control over the felling direction is lost if the BREA- KING STRIP is too narrow or if the directional cut and felling cut are badly placed.

When the felling cut and directional cut are complete the tree should start to fall under its own weight or with the aid of a FELLING WEDGE.

22 – English

Page 21 Page 23
Page 22
Image 22
Husqvarna 335XPT manual Clearing the trunk and preparing your retreat, Felling
Page 21 Page 23

335XPT specifications

The Husqvarna 335XPT is an innovative and powerful chainsaw designed for both professional and advanced home use. Combining cutting-edge technology with user-friendly features, this chainsaw is built to handle a variety of tasks with ease, ranging from tree pruning to felling larger trees.

One of the standout features of the 335XPT is its lightweight construction, making it easy to maneuver in tight spaces and over extended periods. Weighing just under 11 pounds, this chainsaw minimizes user fatigue, allowing for efficient work without compromising on power. The engine is a robust 38.2cc, offering sufficient horsepower to cut through hardwood and softwood alike, delivering impressive performance when it matters most.

The 335XPT comes equipped with Husqvarna’s X-Torq engine technology, which significantly reduces fuel consumption and lowers exhaust emissions. This technology not only benefits the environment but also improves fuel efficiency, allowing users to get more work done between refuels. The chainsaw also features a low vibration system, which lessens the strain on the user's hands and arms, providing added comfort during prolonged use.

For enhanced safety, the Husqvarna 335XPT is fitted with a chain brake that helps prevent accidental cuts, essential for any professional or passionate user. Additionally, the saw features a quick-release air filter, making maintenance simpler and ensuring that the chainsaw operates at peak performance. The side-mounted chain tensioning system allows for easy adjustments without the need for tools, making it quick and convenient to keep the bar and chain in optimal condition.

The ergonomic handle design provides a comfortable grip, reducing fatigue during extended use. The chainsaw also boasts a fuel pump that facilitates easy starts, even in cold conditions, ensuring that users can rely on it during critical jobs.

Overall, the Husqvarna 335XPT is an exceptional chainsaw that combines power, efficiency, and user comfort, making it suitable for professionals and dedicated homeowners alike. With its state-of-the-art features and technologies, this chainsaw stands as a testament to Husqvarna's commitment to quality and performance in outdoor power equipment. Whether tackling heavy-duty forestry tasks or managing smaller garden projects, the 335XPT proves to be a reliable and versatile tool that users can count on for years to come.