Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna 335XPT manual Adjustment of the oil pump, Daily maintenance, Cooling system

Models: 335XPT

1 36
Download 36 pages 29.63 Kb
Page 32
Image 32

MAINTENANCE

Adjustment of the oil pump

Below you will find some general maintenance instructions. If you have more questions, contact your servicing dealer.

The oil pump is adjustable. Adjustments are made by

Daily maintenance

turning the screw using a screwdriver or combination spanner. The saw is supplied from the factory set to 1 turn open. Turning the screw clockwise will reduce the oil flow and turning the screw anti-clockwise will increase the oil flow.

1. Check the throttle trigger

for smooth operation. If

any binding occurs, or if

engine fails to return to

idle, the saw should be

taken to your dealer,

before it is used again.

Also, be sure that the

trigger cannot be pulled

until the throttle trigger

lockout is depressed.

2. Clean the chain brake

and check its function

according to the

instructions. Make sure

1

2

WARNING! The engine must not be running when making adjustments.

Cooling system

To obtain optimal running temperature the saw is equipped with a cooling system.

that the chain catcher is

undamaged. Otherwise

replace it immediately.

3. Clean or replace the air

filter as necessary. Check

for damage or holes.

4. The bar should be turned

daily for more even wear.

Check the lubrication hole

in the bar, to be sure it is

not clogged. Clean the

bar groove and lubricate

the bar sprocket tip.

3

4

5

The cooling system consists of:

1.Air intake on the starter unit.

2.Air guide plate.

3.Fan blades on the flywheel.

4.Cooling fins on the cylinder.

1

2

3

4

5.

Check the function of the

 

oiler to be sure the bar

 

and chain receive proper

 

lubrication.

6.

Sharpen the chain and

 

check its tension and

 

condition. Check the drive

 

sprocket for wear.

 

Replace if necessary.

7.

Check the starter and

 

starter cord for wear or

 

damage. Clean the air

6

7

Clean the cooling system with a brush once a week, more often in demanding conditions. A dirty or blocked cooling system results in the saw overheating which causes damage to piston and cylinder.

 

intake slots on the starter

 

housing.

8.

Check for any loose nuts

 

and screws and retighten

 

if necessary.

9.

Test the stop switch to be

 

sure it shuts off the

 

engine.

8

9

32 – English

Page 31 Page 33
Page 32
Image 32
Husqvarna 335XPT manual Adjustment of the oil pump, Daily maintenance, Cooling system
Page 31 Page 33

335XPT specifications

The Husqvarna 335XPT is an innovative and powerful chainsaw designed for both professional and advanced home use. Combining cutting-edge technology with user-friendly features, this chainsaw is built to handle a variety of tasks with ease, ranging from tree pruning to felling larger trees.

One of the standout features of the 335XPT is its lightweight construction, making it easy to maneuver in tight spaces and over extended periods. Weighing just under 11 pounds, this chainsaw minimizes user fatigue, allowing for efficient work without compromising on power. The engine is a robust 38.2cc, offering sufficient horsepower to cut through hardwood and softwood alike, delivering impressive performance when it matters most.

The 335XPT comes equipped with Husqvarna’s X-Torq engine technology, which significantly reduces fuel consumption and lowers exhaust emissions. This technology not only benefits the environment but also improves fuel efficiency, allowing users to get more work done between refuels. The chainsaw also features a low vibration system, which lessens the strain on the user's hands and arms, providing added comfort during prolonged use.

For enhanced safety, the Husqvarna 335XPT is fitted with a chain brake that helps prevent accidental cuts, essential for any professional or passionate user. Additionally, the saw features a quick-release air filter, making maintenance simpler and ensuring that the chainsaw operates at peak performance. The side-mounted chain tensioning system allows for easy adjustments without the need for tools, making it quick and convenient to keep the bar and chain in optimal condition.

The ergonomic handle design provides a comfortable grip, reducing fatigue during extended use. The chainsaw also boasts a fuel pump that facilitates easy starts, even in cold conditions, ensuring that users can rely on it during critical jobs.

Overall, the Husqvarna 335XPT is an exceptional chainsaw that combines power, efficiency, and user comfort, making it suitable for professionals and dedicated homeowners alike. With its state-of-the-art features and technologies, this chainsaw stands as a testament to Husqvarna's commitment to quality and performance in outdoor power equipment. Whether tackling heavy-duty forestry tasks or managing smaller garden projects, the 335XPT proves to be a reliable and versatile tool that users can count on for years to come.