Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna 1151375-95 manual Bar and chain combinations, model 334T, Saw chain ﬁling and ﬁle gauges

Models: 1151375-95 338XPT EPA III

1 44

Download 44 pages 46.37 Kb

Page 37

Recommended original and replacement bar and chain combinations

TECHNICAL DATA

Recommended original and replacement bar and chain combinations

Following is a list of recommended cutting equipment for the Husqvarna chain saw models 334T and 338XPT. The combinations of power head, bar and chain have been tested and found to be in accordance with the kickback and vibration requirements of ANSI B175.1–2000.

The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the corresponding maximum nose radius of a hard nose.

The following list is the chain saw manufacturers recommendations. There may be other combinations available, which will also achieve kickback reduction.

As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list. For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of sprocket teeth may be considered to have equivalent kickback energy. A hard nose bar having the same length and nose radius as a sprocket-nose bar may be considered to have equivalent or less kickback energy than the sprocket-nose bar.

Low kickback saw chain is a chain which has only met the kickback performance requirements of ANSI B 175.1 safety requirements for gasoline powered chain saws when tested on the representative sample of chain saws below 3.8 cu. in. speciﬁed in ANSI 175.1. We recommend that you as a replacement use the listed chains or "Low kickback saw chains" which are available at your dealer.

Bar and chain combinations, model 334T

		Bar			Chain

Length, inch	Pitch, inch	Gauge, inch	Max. nose radius	Type		Drive link count

12	3/8	1,3	7 T	Husqvarna H36		45

14	3/8	1,3	7 T			52
14	3/8	1,3	7 T			52

Bar and chain combinations, model 338XPT

		Bar			Chain

Length, inch	Pitch, inch	Gauge, inch	Max. nose radius	Type		Drive link count

12	3/8	1,3	7T			45

14	3/8	1,3	7T	Husqvarna H36		52

16	3/8	1,3	7T			56

Saw chain ﬁling and ﬁle gauges

English – 37

Image 37

Husqvarna 1151375-95 Bar and chain combinations, model 334T, Bar and chain combinations, model 338XPT, Technical Data

Contents

English Operator’s manual 334T 338XPT EPA III, CARBSymbols on the machine KEY TO SYMBOLSSymbols in the operator’s manual Contents CONTENTSDear customer INTRODUCTIONWhat is what on the chain saw? WHAT IS WHAT?Before using a new chain saw GENERAL SAFETY PRECAUTIONSAlways use common sense Personal protective equipment Machine′s safety equipmentGENERAL SAFETY PRECAUTIONS WARNING! Most chain saw accidentsGENERAL SAFETY PRECAUTIONS Chain brake and front hand guardThrottle lockout Will my hand always activate the chain brake during a kickback?Chain catcher Vibration damping systemCutting equipment Stop switchMufﬂer General rulesCutting equipment designed to reduce kickback Sharpening your chain and adjusting depth gauge settingGENERAL SAFETY PRECAUTIONS General advice on adjusting depth gauge setting GENERAL SAFETY PRECAUTIONSincreased if the depth gauge setting is WARNING! Departure from the sharpening instructions considerablyLubricating cutting equipment Tensioning the chainGENERAL SAFETY PRECAUTIONS Adjustment of depth gauge settingFilling with chain oil GENERAL SAFETY PRECAUTIONSChecking chain lubrication Chain drive sprocketGENERAL SAFETY PRECAUTIONS Fitting the bar and chain ASSEMBLYFuel FUEL HANDLINGGasoline Two-stroke oilFueling Fuel safetyTransport and storage Long-term storageStarting and stopping STARTING AND STOPPINGCold engine Warm engineSTARTING AND STOPPING StoppingWORKING TECHNIQUES Basic safety rulesBefore use General working instructionsGeneral rules WORKING TECHNIQUESDo not let go of the handles Using the chainsaw in the tree Working with tree service chain-saws from a rope and harnessWORKING TECHNIQUES General requirements working at heightWORKING TECHNIQUES Basic cutting techniqueStarting the saw in the tree One-hand use of the chainsawWORKING TECHNIQUES Felling technique for tree topsFelling direction WORKING TECHNIQUESWARNING! During critical felling operations, hearing protectors should beGeneral advice Freeing a tree that has fallen badlyWORKING TECHNIQUES WARNING! Unless you have specialWhat is kickback? How to avoid kickbackWORKING TECHNIQUES Function, Basic settings, Fine adjustment MAINTENANCEBasic settings and running in Fine adjustmentCorrectly adjusted carburetor Checking, maintaining and servicing chain saw safety equipmentHigh speed jet H MAINTENANCEStop switch MAINTENANCEThrottle lockout Chain catcherStarter MufﬂerChanging a broken or worn starter cord MAINTENANCETensioning the recoil spring Air ﬁlterChanging a broken recoil spring Fitting the starterSpark plug Adjustment of the oil pumpLubricating the bar tip sprocket Cooling systemMAINTENANCE Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data TECHNICAL DATABar and chain combinations, model 334T Recommended original and replacement bar and chain combinationsBar and chain combinations, model 338XPT Saw chain ﬁling and ﬁle gaugesFEDERAL AND CALIFORNIA EMISSIONS CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONSMANUFACTURER′S WARRANTY COVERAGE OWNER′S WARRANTY RESPONSIBILITIESHOW TO FILE A CLAIM WHAT IS NOT COVEREDWHERE TO GET WARRANTY SERVICE MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTSSafety precautions for chain saw users AMERICAN STANDARD SAFETY PRECAUTIONSKickback safety precautions Other safety precautionsPage ´z+SE¶5j¨ ´z+SE¶5j¨ Page ´z+SE¶5j¨ ´z+SE¶5j¨ 1151375-95