GENERAL SAFETY PRECAUTIONS
Right hand guard
Apart from protecting your hand if the chain jumps or snaps, the right hand guard stops branches and twigs from interfering with your grip on the rear handle.
Vibration damping system
Your machine is equipped with a vibration damping system that is designed to reduce vibration and make operation easier.
The machine′s vibration damping system reduces the transfer of vibration between the engine unit/cutting equipment and the machine′s handle unit.The body of the chain saw, including the cutting equipment, is insulated from the handles by vibration damping units.
Cutting hardwoods (most broadleaf trees) creates more vibration than cutting softwoods (most conifers). Cutting with cutting equipment that is blunt or faulty (wrong type or badly sharpened) will increase the vibration level.
! | WARNING! Overexposure to vibration |
can lead to circulatory damage or nerve | |
| damage in people who have impaired |
| circulation. Contact your doctor if you |
| experience symptoms of overexposure |
| to vibration. Such symptoms include |
| numbness, loss of feeling, tingling, |
| pricking, pain, loss of strength, changes |
| in skin colour or condition. These |
| symptoms normally appear in the |
| fingers, hands or wrists. These |
| symptoms may be increased in cold |
| temperatures. |
Stop switch
Use the stop switch to switch off the engine.
Muffler
The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user.
! | WARNING! The exhaust fumes from the | |
engine are hot and may contain sparks | ||
| ||
| which can start a fire. Never start the | |
| machine indoors or near combustible | |
| material! |
In areas with a hot, dry climate there is a high risk of fires. These areas are sometimes subject to government rules requiring among other things the muffler must be equipped with an approved type of spark arrestor screen.
CAUTION! The muffler gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/or vapours.
! | WARNING! Never use a saw without a | |
muffler, or with a damaged muffler. A | ||
| ||
| damaged muffler may substantially | |
| increase the noise level and the fire | |
| hazard. Keep fire fighting equipment | |
| handy. If a spark arrestor screen is | |
| required in your area, never use the saw | |
| without or with a broken spark arrestor | |
| screen. |
Cutting equipment
This section describes how to choose and maintain your cutting equipment in order to:
•Reduce the risk of kickback.
•Reduce the risk of the saw chain breaking or jumping off the bar.
•Obtain optimal cutting performance.
English – 11
