Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna 365 Fuelling, WARNING! Taking the following precautions will lessen the risk of ﬁre

Models: 372XP 365

1 40

Download 40 pages 60.03 Kb

Page 26

Image 26

FUEL HANDLING

Fuelling

WARNING! Taking the following precautions,

!will lessen the risk of ﬁre:

Do not smoke or place hot objects near fuel. Always shut off the engine before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel ﬁlter must be replaced at least once a year. Contamination in the tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before refuelling. The capacities of the chain oil tank and fuel tank are carefully matched. You should therefore always ﬁll the chain oil tank and fuel tank at the same time.

Min 3 m

(10ft)

26 – English

Page 26

Image 26

Husqvarna 365 Fuelling, WARNING! Taking the following precautions will lessen the risk of ﬁre, Min 3 m 10ft, Fuel Handling

Contents

English 362XP 365 372XPOperator′s manual KEY TO SYMBOLS Key to symbolsBefore using a new chain saw CONTENTSContents KEY TO SYMBOLShappen when the chain touches the operator SAFETY INSTRUCTIONSMachine′s safety equipment Personal protective equipmentChain brake and front hand guard SAFETY INSTRUCTIONSChain catcher Stop switchThrottle lock Right hand guardChecking brake band wear When the bar hits the stump the brake should be appliedMufﬂer Checking the front hand guardChain catcher Stop switchThrottle lock Right hand guardCutting equipment WARNING! Never use a machine with faultyWARNING! Faulty cutting equipment or the General rulesNone ChainSome terms that describe the bar and chain Standard Low-kickbackGeneral information on sharpening cutting teeth Sharpening your chain and adjusting raker clearanceWARNING! The following faults will increase Sharpening cutting teethTensioning the chain General advice on setting raker clearanceSetting the raker clearance if the raker clearance is too largeFilling with chain oil Lubricating cutting equipmentChain oil Checking chain lubricationChecking wear on cutting equipment Lubricating the bar tip sprocketNeedle bearing lubrication Chain drive sprocketAvoid situations where there is a risk of How to avoid kickbackWhat is kickback? WARNING! Kickback can happen veryWARNING! The risk of accident is increased General safety precautionsWARNING! Running an engine in a conﬁned Before useTransport and storage Fuel safetyStarting WARNING! Fuel and fuel vapour are highlyBasic cutting technique Basic safety rulesGeneral working instructions GeneralWARNING! If the chain jams in the cut stop TermsCutting SAFETY INSTRUCTIONSSafe distance Tree felling techniqueLimbing Felling directionFelling cut FellingDirectional cuts SAFETY INSTRUCTIONSCutting the trunk into logs General adviceFreeing a tree that has fallen badly Freeing a ”trapped tree”WHAT IS WHAT? What is what on the chain saw?Fitting the bar and chain ASSEMBLYWARNING! Always wear gloves, when working with the chain Fitting a spike bumperFuel ventilation when handling fuelFUEL HANDLING PetrolTighten the fuel cap carefully after refuelling WARNING! Taking the following precautions will lessen the risk of ﬁreFuelling Always move the machine away from the refuelling area before startingCold engine STARTING AND STOPPINGStarting and stopping Warm engineSTARTING AND STOPPING StoppingStop the engine by switching off the ignition Basic settings and running in MAINTENANCEFunction, Basic settings, Fine adjustment Fine adjustmentStarter Correctly adjusted carburettorWARNING! When the recoil spring is wound High speed jet HTensioning the recoil spring Air ﬁlterSpark plug Changing a broken recoil springMufﬂer Adjustment of the oil pumpWARNING! The engine must not be running when making adjustments Needle bearing lubricationHeated handles ”Air Injection” centrifugal cleaningTemperature -5C or colder Electrical carburettor heatingMonthly maintenance Daily maintenanceWeekly maintenance Below you will ﬁnd some general maintenance instructionsWeight TECHNICAL DATATechnical data EnginePitch, inch Bar and chain combinationsLength, inches Max. number of teeth onEN292-2, CISPR 121997, EN608 EC-declaration of conformityApplies to Europe only TECHNICAL DATA´z+H4¶6j¨ ´z+H4¶6j¨ Page 1140206-26 ´z+H4¶6j¨ ´z+H4¶6j¨