Husqvarna 372XP, 365 Contents, Before using a new chain saw, Key To Symbols, Safety Instructions

CONTENTS

Contents
KEY TO SYMBOLS
Key to symbols	2
CONTENTS
Contents	3
Before using a new chain saw	3
SAFETY INSTRUCTIONS
Personal protective equipment	4
Machine′s safety equipment	4
Checking, maintaining and servicing the machine′s
safety equipment	7
Cutting equipment	9
How to avoid kickback	15
General safety precautions	16
General working instructions	18
WHAT IS WHAT?
What is what on the chain saw?	23
ASSEMBLY
Fitting the bar and chain	24
FUEL HANDLING
Fuel	25
STARTING AND STOPPING
Starting and stopping	27
MAINTENANCE
Carburettor	29
Starter	30
Air filter	31
Spark plug	31
Muffler	32
Needle bearing lubrication	32
Adjustment of the oil pump	32
Cooling system	32
”Air Injection” centrifugal cleaning	33
Heated handles	33
Electrical carburettor heating	33
Winter use	33
Daily maintenance	34
Weekly maintenance	34
Monthly maintenance	34
TECHNICAL DATA
Technical data	35
Bar and chain combinations	36
EC-declaration of conformity	37

Before using a new chain saw

•Please read the operator’s manual carefully.

•Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly.

•Refuel, start the chain saw and check the carburettor settings. See the instructions under the headings Fuel Handling, Starting and Stopping, and Carburettor.

•Do not use the chain saw until sufficient chain oil has reached the chain. See instructions under the heading Lubricating cutting equipment.

IMPORTANT! If the carburettor mixture is too lean it greatly increases the risk of engine failure. Poor maintenance of the air filter will cause carbon build-up on the spark plug and lead to starting difficulties. If the chain is improperly adjusted it will cause increased wear or damage to the bar, drive sprocket and chain.

WARNING! Under no circumstances may the

!design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others.

WARNING! A chain saw is a dangerous tool

!if used carelessly or incorrectly and can cause serious, even fatal injuries. It is very important that you read and understand the contents of this operator’s manual.

WARNING! The inside of the muffler contain

!chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Long term inhalation of the

!engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

English – 3