Husqvarna 385XP manual Technical Data, Technical data

TECHNICAL DATA

Technical data

	385XP	390XP
Engine
Cylinder displacement, cm3	84,7	88
Cylinder bore, mm	54	55
Stroke, mm	37	37
Idle speed, rpm	2700	2700
Power, kW/ rpm, Europe	4,6/9600	4,8/9600
Power, kW/ rpm, Australia	4,6/9600	4,8/9600
Ignition system
Manufacturer of ignition system	SEM	SEM
Type of ignition system	CD	CD
Spark plug	NGK BPMR 7A/	NGK BPMR 7A/
	Champion RCJ 7Y	Champion RCJ 7Y
Electrode gap, mm	0,5	0,5
Fuel and lubrication system
Manufacturer of carburettor	Tillotson	Tillotson
Carburettor type	HS 299A	HS 299A
Fuel tank capacity, litre	0,9	0,9
Oil pump capacity at 9,000 rpm, ml/min	6-24	6-24
Oil tank capacity, litre	0,5	0,5
Type of oil pump	Automatic	Automatic
Weight
Chain saw without bar or chain, empty tanks, kg	7,0	7,1
	XPG: 7,2	XPG: 7,3
Noise emissions
(see note 1)
Sound power level, measured dB(A)	117	117
Sound power level, guaranteed LWA dB(A)	118	118
Sound levels
(see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A)
Europe	105,5	107,5
Australia	105,5	107,5
Vibration levels
(see note 3)
Front handle, m/s2	5,7	5,8
Rear handle, m/s2	8,0	7,0
Chain/bar
(see note 4)
Standard bar length, inch/cm	18"/46	18"/46
Recommended bar lengths, inch/cm	18-28”/46-70	18-28”/46-70
Usable cutting length, inch/cm	17-27"/43-68	17-27"/43-68
Pitch, inch/mm	3/8" /9,52	3/8" /9,5
Thickness of drive links, inch/mm	0,058/1,5	0,058/1,5
Type of drive sprocket/number of teeth	Rim/7	Rim/7
Chain speed at max. power, m/sec	21,4	21,4

Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.

Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for noise pressure

levels under various working conditions with the following time distribution: 1/2 idling, 1/2 max. load.

Note 3: Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration levels under

various working conditions with the following time distribution: 1/2 idling, 1/2 max. load.

Note 4: Different bar lengths and different saw chains apply on different markets, see the next page.

English – 39