TECHNICAL SPECIFICATIONS
Weight and Dimensions 4000 |
|
|
Weight – dry | 440 lbs | 200 kg |
Weight with gasoline and oil full | 454 lbs | 206 kg |
Length | 61 inch | 1549 mm |
Width | 28 inch | 711 mm |
Height | 38 inch | 965 mm |
Blade |
|
|
Material cut | Green concrete only |
|
Blade type | 13.5” (343 mm) or 12.0” (305 mm) dry cut with | |
Blade rotation | Counter clockwise, upcutting | |
Blade shaft speed | 3500 rpm |
|
Cutting depth | 3 inch maximum (76 mm) depending on blade size and | |
| amount of blade wear |
|
Cutting distance from wall | 3 1/2 inch | 89 mm |
Average cutting rate - Estimate only. Speed will vary with job conditions and concrete mixes.
| 3 inch (76 mm) depth | 2 inch (51 mm) depth |
Soft aggregates | 14 ft/min (4.3 m/min) | 24 ft/min (7.3 m/min) |
Medium aggregates | 11 ft/min (3.4 m/min) | 17 ft/min (5.2 m/min) |
Hard aggregates | 7 ft/min (2.1 m/min) | 9 ft/min (2.7 m/mim) |
Blades are available in 13.5 inch (343 mm) and 12 inch (305 mm) diameters and in 0.100 inch (2.5 mm), | ||
0.250 inch (6.4 mm), 0.380 inch (9.7 mm), and 0.500 inch (12.7 mm) widths | ||
Engine: | Kohler Command Pro CH18S | |
Engine oil volume | 2 quarts | 1.9 liters |
Gasoline tank volume | 4.5 gal | 17 liters |
Type | Air cooled, | |
| valves, gasoline engine |
|
Air filter | Dual element construction duty | |
Oil system | Full pressure lubrication with | |
Muffler | Low noise, front exhaust | |
Emissions | Complies with EPA Phase 2 and CARB Tier II USA | |
| regulations |
|
Cooling | Air cooled |
|
Cylinder | Aluminum with cast iron liner | |
Controls | Engine mounted manual throttle and choke levers, | |
| manual on/off switch |
|
CONFORMITY CERTIFICATES
CALIFORNIA AIR RESOURCES BOARD (CARB): This machine is considered a preempt
For more information see the website http://www.arb.ca.gov/msprog/offroad/preempt.htm
15
