Creating a Temporary Shelter

1.In an emergency, use the original shipping carton.

2.Cut off top carton flaps and one long side of carton to expose muffler side of unit. If required, tape up other sides of carton to fit over generator as shown.

Wind

NOTE: If required, remove wheel kit to fit carton over generator as shown.

3.Cut appropriate slots to access receptacles of unit.

4.Face exposed end away from wind and elements.

5.Locate generator as described in the section Generator Location. Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

WARNING

Running engine gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide can cause headache, fatigue, dizziness, vomiting, confusion, seizures, nausea, fainting or death.

Operate generator ONLY outdoors.

Install a battery operated carbon monoxide alarm near the bedrooms.

Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes, or other openings.

DO NOT start or run engine indoors or in an enclosed area, (even if windows and doors are open), including the generator compartment of a recreational vehicle (RV).

6.Start generator as described in the section Starting the Engine, then place carton over generator. Keep at least 5 ft. (1.5 m) clearance on all sides of generator including overhead with shelter in place.

WARNING

Contact with muffler area can result in serious burns.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

DO NOT touch hot parts and AVOID hot exhaust gases.

Allow equipment to cool before touching.

Keep at least 5 feet (1.5 m) of clearance on all sides of generator including overhead.

Remove shelter when temperatures are above 40°F [4°C].

7.Remove shelter when temperatures are above 40°F [4°C].

8.Turn engine OFF and let cool two (2) minutes before refueling. Let any spilled fuel evaporate before starting engine.

Creating a Permanent Shelter

1.Build a structure that will enclose three sides and the top of the generator, making sure muffler side of generator is exposed.

NOTE: Structure should hold enough heat created by the generator to prevent icing problem.

2. DO NOT enclose generator any more than shown.

NOTE: If a wheel kit is installed on the generator, enlarge shelter accordingly.

3.Follow steps 3 through 8 as described previously in Creating a Temporary Shelter.

13

Page 13
Image 13
Husqvarna 420 GN manual Creating a Temporary Shelter, An emergency, use the original shipping carton

420 GN specifications

The Husqvarna 420 GN is a powerful and versatile garden tool designed to meet the needs of both professional landscapers and dedicated gardening enthusiasts. This robust chainsaw boasts a range of advanced features and technologies that enhance its performance, ensuring efficient and effective cutting in various outdoor tasks.

One of the standout features of the Husqvarna 420 GN is its powerful engine, which provides a remarkable power-to-weight ratio. The excellent performance is complemented by a low vibration design, allowing extended periods of use without discomfort. The chainsaw is equipped with a centrifugal air cleaning system that significantly reduces the amount of debris and dust entering the air filter. This ensures longer operating periods between air filter cleanings and contributes to the overall longevity of the equipment.

The intuitive design of the Husqvarna 420 GN leads to excellent maneuverability. Its lightweight construction allows users to easily handle the chainsaw during various cutting applications, improving efficiency and precision. The front and rear handles are ergonomically designed, providing a secure grip that enhances control, particularly during demanding cutting tasks.

The chainsaw features an X-Torque engine technology, which minimizes fuel consumption and emissions while maintaining high levels of power. This emphasizes Husqvarna’s commitment to sustainability without compromising performance. Additionally, the chainsaw is equipped with an automatic oil pump that optimizes chain lubrication based on usage, ensuring the chain is always properly lubricated for optimal cutting performance.

The chainsaw is also designed for easy maintenance, with a tool-less chain tensioning system that allows users to adjust the chain tension quickly and efficiently without the need for additional tools. The sturdy construction of the Husqvarna 420 GN, coupled with its ideal size for various cutting tasks, makes it a favorite among professionals and avid gardeners alike.

Overall, the Husqvarna 420 GN is an exceptional choice for those seeking a reliable and powerful chainsaw. With its combination of advanced technologies, ergonomic design, and ease of maintenance, it sets a high standard in the world of outdoor power equipment, making it a valuable addition to any toolkit. Whether tackling heavy-duty jobs or handling lighter pruning tasks, the Husqvarna 420 GN delivers excellence in performance and reliability.