Husqvarna 49 manual General Safety Precautions, Min m, 10 ft

SAFETY INSTRUCTIONS

GENERAL SAFETY PRECAUTIONS

1	Chain saws are designed solely for cutting wood. The only
	cutting equipment that can be used with this chain saw are
	the combinations of bars and chains recommended in the
	”Technical data” section.
2	Never use a chain saw if
	you are tired, if you have
	drunk alcohol, or if you
	are taking medication that

7FUEL SAFETY

(Refuelling, fuel mixture, storage.)

!Fuel and fuel vapour are highly inflammable. Take care when handling fuel and chain oil. Keep away from naked flames and do not breathe in fuel vapour.

	affects your vision, your
	judgement or your co-
	ordination.
3	Always wear suitable protective clothing. See the section
	on ”Personal protective equipment”.
4	Never use a chain saw that has been modified in any way
	from its original specification.
5	Never use a chain saw
	that is faulty. Carry out
	the regular checks,
	maintenance and service
	routines described in this
	manual. Some
	maintenance and service
	measures must be carried
	out by trained specialists.
	See the section on
	”Maintenance”.
6	STARTING

• Never start a chain saw unless the bar, chain and clutch cover are fitted

•Never try to refuel the saw while it is running.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (2-stroke mixture).

•Move the saw at least 3 m from the refuelling point before starting it.

•Never start the chainsaw:

a)If you have spilt fuel or chain oil on the saw. Wipe off the spill and allow remaining fuel to evaporate.

b)If you spill fuel or chain oil on yourself or your clothes. Change your clothes.

c)If there is a fuel leak. Check regularly for leaks from the FUEL CAP and FUEL LINES.

Min. 3 m

(10 ft)

correctly. (See section on ”Assembly”).

• Never start a chain saw indoors. Exhaust fumes can be dangerous.

• Before starting the saw make sure there are no people or animals nearby who might be put at risk.

• Place the saw on the ground and hold the rear handle down with your right foot. Grasp the front handle firmly using your left hand. Make sure the chain saw is steady and the chain is not touching the ground. Then grasp the starter handle with your right hand and pull the starter cord.

•Always store the chain saw and fuel away from any sources of sparks or naked flames, e.g. machines, electric motors, relays, switches, boilers, etc.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local petrol station.

8Never use any accessories other than those recommended in this manual. See the sections on ”Cutting equipment” and ”Technical data”.

!The risk of accident is increased if you use the wrong cutting equipment or a chain that is not sharpened correctly. Using the wrong combi- nation of bar and chain can increase the risk of accidents!

18 – English