Husqvarna 500CT manual Charging the Battery, Assembly of Handguard, Initial Charging Procedure

Assembly

A

Assembly of Handguard.

1. Insert Handguard into slot as illustrated in figure A, ensuring that it is securely locat-

ed.

DO NOT USE THE PRODUCT WITH-

OUT FITTING THE HANDGUARD

Charging the Battery

A

2

1

B

1

Initial Charging Procedure

1.Use the charger indoors only.

2.Ensure the charger is not exposed to mois- ture. Keep the charger and the product dry at all times.

3.Connect the charger cable to the Charger Cradle (A1). and plug the Charger into a

suitable household electrical wall socket and switch on (A2)..

4.Place the Battery Pack into the Charger Cradle.(B).

5.The red indicator lamp glows continuously during charging.(B1)

6.Full charge will be achieved in 5-6 hours During charging the charger becomes warm. This is normal and means the charger is operating correctly. When the Battery Pack is fully charged, the red indicator lamp will change to green.

7.Connect the Battery Pack to the product by pressing the two buttons either side of the

Battery Pack and attaching to the back of the product.(C)

C

Re-Charging Your Product

1.Re-charge the battery as soon as the cutting power of your cordless product begins to die and slow down.

2.Avoid running the product into "deep" dis- charge, i.e. avoid flattening the battery com- pletely.

3.Follow the procedure outlined in the Initial

Charging Procedure.

4.Charging the battery according to these instructions should ensure maximum battery life.