Starting and Stopping
D
E
F
Before starting your Hedgetrimmer.
1. Remove blade cover (D).
To start your Hedgetrimmer
1.There are two switch levers fitted to your Hedgetrimmer.
2.Both switch levers need to be held in the operating position (See Fig E) for the product to start.
To stop your Hedgetrimmer
•Move Hedgetrimmer away from cutting area before stopping.
1.To stop, release one of the switch levers.(Fig F)
How to Use
How to Use your Hedgetrimmer
1.Inspect area to be cut before each use - remove objects which can be thrown or become entangled in the cutting blades.
2.Always keep the Hedgetrimmer in front of your body. Hold handle firmly with both hands and stand in a secure and stable position.
3.Allow the cutting blades to reach full speed before entering the material to be cut.
4.Always work going away from people and solid objects such as walls, large stones, trees, vehicles etc.
5.If blade stalls, immediately stop the Hedgetrimmer and clear jammed debris from the cutting blades. Inspect blades and repair
or replace as needed.
Top Cutting
Use a wide sweeping motion. (G) A slight down- ward tilt of the cutting blades in the direction of motion gives the best cutting results.
Side Cutting
When trimming the sides of the hedge, begin at the bottom and cut upwards (H), tapering the hedge inward at the top. This shape will expose more of the hedge, resulting in more uniformed growth.
G
H
