SAFETY INSTRUCTIONS

2Sharpening your chain and adjusting raker clearance

The risk of kickback is increased with a badly sharpened chain!

AGeneral information on sharpening cutting teeth

• Never use a blunt chain. When the chain is blunt you have to exert more pressure to force the bar through the wood and the cuttings will be very small. If the chain is very blunt it will not produce any cuttings at all, just wood powder.

It is very difficult to sharpen a chain correctly without the right equipment. We recommend you use a file gauge. This will help you obtain the maximum kickback reduction and cutting performance from your chain.

The following faults will increase the risk of kickback considerably.

•A sharp chain eats its way through the wood and produces long, thick cuttings.

•The cutting part of the chain is called the CUTTING LINK and this consists of a CUTTING TOOTH (A) and the RAKER LIP (B). The cutting depth is determined by the difference in height between the two.

A

B

• FILE ANGLE TOO LARGE

• CUTTING ANGLE

TOO SMALL

• FILE DIAMETER

TOO SMALL

B Sharpening cutting teeth

•When you sharpen a cutting tooth there are five important factors to remember.

FILING ANGLE

CUTTING ANGLE

FILE POSITION

ROUND FILE DIAMETER

FILE DEPTH

1

5

See the ”Technical data” section for information about sharpening your saw chain.

To sharpen cutting teeth you will need a ROUND FILE and a FILE GAUGE. See the ”Technical data” section for information on the size of file and gauge that are recommended for your saw chain.

1Check that the chain is correctly tensioned. A slack chain is difficult to sharpen correctly.

2Always file cutting teeth from the inside face, reducing the pressure on the return stroke.

File all the teeth on one side first, then turn the saw over and file the teeth on the other side.

3File all the teeth to the same length. When the length of the cutting teeth is reduced to 4 mm (0,16") the chain is worn out and should be replaced.

min 4 mm

(0,16")

12 – English

Page 11 Page 13
Page 12
Image 12
Husqvarna 51 manual Sharpening your chain and adjusting raker clearance, General information on sharpening cutting teeth
Page 11 Page 13

51 specifications

The Husqvarna 51 is a well-regarded chainsaw that has made its mark in the world of outdoor power equipment. Renowned for its balance of performance and usability, the Husqvarna 51 is often favored by both amateur woodcutters and professionals alike. This versatile chainsaw is designed for a range of tasks, from light-duty pruning to more demanding woodcutting jobs.

One of the standout features of the Husqvarna 51 is its powerful 2.3 horsepower engine. This robust engine allows the saw to tackle larger cuts with ease, making it a reliable tool for any woodcutting needs. Coupled with a lightweight design, the chainsaw ensures reduced fatigue during prolonged use, enhancing user comfort and efficiency.

The Husqvarna 51 utilizes a simple yet effective starting system known as the Smart Start technology. This feature minimizes resistance in the starter cord, allowing for easier and quicker engine starts. Consequently, even less experienced users can confidently get the saw up and running without unnecessary frustration.

Another important characteristic of this model is its air injection system. This technology works by using centrifugal force to remove larger debris from the air filter before it reaches the engine. As a result, the filter stays cleaner for longer, reducing the frequency of maintenance and ensuring optimal engine performance. This system significantly prolongs the life of the chainsaw while maintaining high power levels.

The Husqvarna 51 also features an adjustable oil pump that allows operators to control oil flow as needed. This ensures proper lubrication of the chain and bar, which is critical for maintaining performance and extending the lifespan of the cutting components. The saw’s chrome-plated cylinder further contributes to durability by providing an added layer of resistance against wear and tear.

Safety is a priority with the Husqvarna 51, which comes equipped with an inertia-activated chain brake. This feature automatically stops the chain in the event of kickback, providing additional peace of mind to the user. The front hand guard and ergonomic handle design also enhance user control, contributing to a safer and more comfortable cutting experience.

Overall, the Husqvarna 51 stands out as a reliable, sturdy, and user-friendly chainsaw. Its blend of power, technology, and safety features makes it an ideal choice for a variety of cutting tasks, making it popular among both casual users and seasoned professionals. Whether you are trimming branches or cutting firewood, this chainsaw offers the performance you need for effective woodcutting.
Top Page Image Contents