GENERAL SAFETY PRECAUTIONS

WARNING! Mufflers fitted with catalytic

! converters get very hot during use and remain so for some time after stopping. This also applies at idle speed. Contact can result in burns to the skin.

Remember the risk of fire!

WARNING! The inside of the muffler

! contain chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Bear in mind that:

! The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

Locking nut

A locking nut is used to secure some types of cutting attachment.

When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.) Tighten the nut using the socket spanner.

The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

Reduce the risk of blade thrust.

Obtain maximum cutting performance.

Extend the life of cutting equipment.

IMPORTANT!

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.

Keep the teeth of the blade correctly sharpened! Follow our recommendations. Also refer to the instructions on the blade packaging.

Maintain the correct blade setting! Follow our instructions and use the recommended file gauge.

WARNING! Always stop the engine

! before doing any work on the cutting attachment.This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

WARNING! Using an incorrect cutting

! attachment or an incorrectly sharpened blade increases the risk of blade thrust.

Cutting equipment

Saw blades are intended for cutting fibrous types of wood.

Grass blades and grass cutters are intended for cutting coarse grass.

A trimmer head is intended for trimming grass.

10 – English

Page 10
Image 10
Husqvarna 535RXT manual Cutting equipment, Locking nut

535RX, 535RXT specifications

The Husqvarna 535RXT and 535RX are advanced professional-grade string trimmers designed to tackle tough landscaping tasks with efficiency and precision. Renowned for their powerful performance and innovative features, these trimmers are ideal for both commercial landscapers and dedicated homeowners looking for superior reliability and durability.

One of the standout features of the 535RXT and 535RX is their powerful engine technology. Equipped with a 34.6 cc X-Torq engine, these trimmers deliver high performance with reduced fuel consumption and lower emissions, aligning with eco-friendly practices. The X-Torq engine ensures optimal torque and power, making it easy to cut through thick grass and dense vegetation.

Both models are equipped with an ergonomic handle that enhances comfort and reduces user fatigue during prolonged use. The adjustable harness and the lightweight design make maneuvering easier, which is especially advantageous during long hours of operation. This thoughtful ergonomics allows for efficient trimming without compromising on operator comfort.

Versatility is another key characteristic of the Husqvarna 535RXT and 535RX. They are equipped with the patented Smart Start technology, which simplifies the starting process. This feature minimizes resistance in the starter cord, allowing the engine to start quickly with less effort. As a result, users will spend less time preparing to work and more time on the task at hand.

The trimmers come with a robust 2-line cutting system that efficiently handles various types of grass and vegetation. The efficient cutting action leads to cleaner cuts and less wear on the machine. Adjusting the length of the cutting line is straightforward and helps in maintaining high productivity during trimming sessions.

Safety is a consideration in the design of the 535RXT and 535RX models. The trimmers feature a guard that protects the working parts and helps prevent debris from flying towards the operator. Furthermore, the anti-vibration system significantly reduces vibrations experienced by the user, leading to increased comfort and reduced risk of operator fatigue during extended use.

Overall, the Husqvarna 535RXT and 535RX offer powerful performance, user-friendly features, and impressive versatility. Whether for professional landscaping or residential upkeep, these trimmers stand as reliable choices for anyone looking to maintain their outdoor spaces with precision and care. With a commitment to innovation and quality, Husqvarna continues to lead in the outdoor equipment industry, making these models a worthy investment for serious users.