Lawn Mower, Tires, Drive Wheels, Blade Care

MAINTENANCE

LAWN MOWER

Always observe safety rules when performing any main- tenance.

TIRES

•Keep tires free of gasoline, oil, or insect control chem- icals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash, grass cuttings, etc. are in the drive wheel or dust cover area and must be cleaned to free drive wheels. If necessary to clean the drive wheels, be sure to clean all wheels.

1.Remove hubcaps, locknuts and washers.

2.Remove wheels from wheel adjusters.

3.Remove any trash or grass cuttings from inside the dust cover, pinion and/or drive wheel gear teeth.

4.Put wheels back in place.

NOTE: If after cleaning, the drive wheels do not turn freely, contact a qualiﬁed service center.

BLADE CARE

For best results, mower blade must be kept sharp. Replace bent or damaged blades.

CAUTION: Useonlyareplacementblade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is hazardous, could damage your mower and void your warranty.

TO REMOVE BLADE (See Fig. 12)

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air ﬁlter and carburetor are up.

3.Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter-clockwise.

5.Remove blade and attaching hardware (bolt, lock washer and hardened washer).

6.Remove debris shield.

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE (See Fig. 12)

1. Position the blade adapter on the engine crankshaft. Be sure key in adapter and crankshaft keyway are aligned; and that the drive belt is inside the tab of the belt retainer.

2.Install debris shield.

3.Position blade on the blade adapter.

IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON BLADE ADAPTER.

4.Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine.

5.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

6.Use block of wood between blade and lawn mower hous- ing and tighten the blade bolt, turning clockwise.

•The recommended tightening torque is 35–40 ft. lbs.

IMPORTANT: BLADE BOLT IS HEAT TREATED. IF BOLT NEEDS REPLACING, REPLACE ONLY WITHAPPROVED BOLT.

	BLADE	CRANK-
	BLADE	SHAFT
	ADAPTER	SHAFT
	ADAPTER	KEYWAY
		KEYWAY
	BELT
	RETAINER
		KEY
	DEBRIS	TRAILING
	DEBRIS	EDGE
	SHIELD	EDGE
		HARDENED
	BLADE	WASHER
	BLADE
		LOCK WASHER
		BLADE BOLT

FIG. 12

TO SHARPEN BLADE (See Fig. 13)

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced. An unbalanced blade will cause eventual damage to lawn mower or engine.

•The blade can be sharpened with a ﬁle or on a grind- ing wheel. Do not attempt to sharpen while on the mower.

CENTER HOLE

5/8" BOLT OR PIN

BLADE

FIG. 13

5525PW specifications

Husqvarna, a renowned name in outdoor power equipment, offers an array of high-performance chainsaws, including the 6026PW, 9030PW, 1335PW, and 5525PW models. Each model is designed to cater to various cutting needs, making them suitable for both professional and amateur users.

The Husqvarna 6026PW boasts a robust engine, specifically designed for heavy-duty use. With its powerful air-cooled two-stroke engine, this model delivers exceptional cutting performance while maintaining low levels of vibration, which reduces user fatigue during extended use. The integrated air filter system prolongs the lifespan of the engine, ensuring it operates efficiently under demanding conditions.

The 9030PW model stands out for its advanced technology and ease of use. It features an automatic oiler system that ensures consistent lubrication of the chain, enhancing both performance and longevity. The 9030PW also benefits from an ergonomic design, which includes an adjustable handle for optimal comfort and control. This model's lightweight construction makes it easy to maneuver, perfect for detailed trimming or larger cutting tasks.

The Husqvarna 1335PW is designed with the homeowner in mind, offering a perfect balance of power and finesse. One of its defining features is the X-Torq engine, which provides higher torque over a wider RPM range while also reducing fuel consumption and emissions. The 1335PW also includes a quick-release air filter for easy cleaning and maintenance, ensuring your chainsaw remains in peak condition.

Finally, the Husqvarna 5525PW combines strength and versatility, making it suitable for a diverse range of cutting applications. This model features a durable chain brake for added safety, helping to prevent accidents during operation. The 5525PW's easy-to-start system minimizes starting effort, allowing users to get to work quickly without hassle.

All four models benefit from Husqvarna's commitment to user safety and comfort, making them ideal for both professionals and DIY enthusiasts. With innovative features and robust design, the Husqvarna 6026PW, 9030PW, 1335PW, and 5525PW represent the perfect blend of performance, durability, and technology, carving out a niche for themselves in the competitive chainsaw market.

Husqvarna 5525PW warranty Lawn Mower, Tires, Drive Wheels, Blade Care

Models: 5525PW