MAINTENANCE
Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.
Daily maintenance | Weekly maintenance | Monthly maintenance | |
|
|
| |
| On chain saws without a catalytic | Check the brake band on the chain | |
| brake for wear. Replace when less | ||
Clean the outside of the machine. | converter, check the cooling system | ||
than 0.024 inch (0.6 mm) remains at | |||
| weekly. | ||
| the most worn point. | ||
|
| ||
|
|
| |
Check that the components of the | Check the starter, starter cord and | Check the clutch centre, clutch drum | |
throttle control work safely. (Throttle | |||
return spring. | and clutch spring for wear. | ||
lockout and throttle control.) | |||
|
| ||
|
|
| |
Clean the chain brake and check that |
|
| |
it operates safely. Make sure that the | Check that the vibration damping | Clean the spark plug. Check that the | |
chain catcher is undamaged, and | elements are not damaged. | electrode gap is 0.020 inch (0.5 mm). | |
replace it if necessary. |
|
| |
|
|
| |
The bar should be turned daily for |
|
| |
more even wear. Check the |
|
| |
lubrication hole in the bar, to be sure it | Lubricate the clutch drum bearing. | Clean the outside of the carburetor. | |
is not clogged. Clean the bar groove. | |||
|
| ||
If the bar has a sprocket tip, this |
|
| |
should be lubricated. |
|
| |
|
|
| |
Check that the bar and chain are | File off any burrs from the edges of | Check fuel hose for cracks or other | |
getting sufficient oil. | the bar. | damage. Change if necessary. | |
|
|
| |
Check the saw chain with regard to |
|
| |
visible cracks in the rivets and links, |
|
| |
whether the saw chain is stiff or | Clean or replace the spark arrestor | Empty the fuel tank and clean the | |
whether the rivets and links are | screen on the muffler. | inside. | |
abnormally worn. Replace if |
|
| |
necessary. |
|
| |
|
|
| |
Sharpen the chain and check its |
|
| |
tension and condition. Check the | Clean the carburetor compartment. | Empty the oil tank and clean the | |
drive sprocket for excessive wear and | inside. | ||
| |||
replace if necessary. |
|
| |
|
|
| |
Clean the starter units air intake. | Clean the air filter. Replace if | Check all cables and connections. | |
necessary. | |||
|
| ||
|
|
| |
Check that nuts and screws are tight. |
|
| |
|
|
| |
Check that the stop switch works |
|
| |
correctly. |
|
| |
|
|
| |
Check that there are no fuel leaks |
|
| |
from the engine, tank or fuel lines. |
|
| |
|
|
| |
On chain saws with a catalytic |
|
| |
converter, check the cooling system |
|
| |
daily. |
|
| |
|
|
|
38 – English
